AOI_RS_v85_en.pdf - 第64页
Chapter 2 Repair Station Main Progr am AOI Repair Station 60 This DA TECODE is generated when [1234567_datecode.txt] (format property: U1;200408, U2;20040709, U3;2004060) written into [C:\AOI_REP AIR_DA T A\DA TECODE \…
Chapter 2 Repair Station Main Program
AOI Repair Station
59
generated under [C:\rsinstall\SPCOutPut] when the repair staff
confirm a data file, and then the AOI will acquire this file and
display it on the screen during board out. The repair station also has
the function of generating basic statistical data like totaltestboard,
defectcomponent, yieldrate, defectrate, rpasscount, wdpasscount,
dpmo every time the repair staff confirms a data file.
SetDateTime8:00/20:00－ When this is set to [True] the data will
be clear and recalculate at AM 8:00 and PM 8:00.
Set－When you set it [True], the board number will be divided by 2
and output.
When the function is enabled, the words, [Board Information],
change to bold. Double click on the words then the following dialog
will be open to set the starting time.
10.6.6.5 Defect Output Count
A limitation to the number of FOV output, setting it to [0] will
output all
10.6.6.6 Default Light
When it set [True] and you have set the enhanced lighting for FOV
images, the lighting will be changed to the original lighting for the
next FOV.
10.6.6.7 DateCodeCheck (ONLY IN 7100)
Chapter 2 Repair Station Main Program
AOI Repair Station
60
This DATECODE is generated when [1234567_datecode.txt]
(format property: U1;200408, U2;20040709, U3;2004060) written
into [C:\AOI_REPAIR_DATA\DATECODE\], the data file will be
written into DB when the REPAIR STATION performs the
[InsertData.exe], DATECODE will be seeing at CONFIRM; the
data must be confirmed fail in order to edit the DATECODE.
10.6.6.8 AfterAoiBarcodeCheck
When set it [True] and there is the same barcode duplicated, for the
second and the later data, the [Test Count] field will be changed to
2.
10.6.6.9 PassBoard Auto To SFC
By setting the [PassBoard Auto To SFC] to [True] will
automatically send the [PASS] data to client’s SFC.
10.6.6.10 PassBoard Auto To Confirm
By setting this item to [True] will confirm the [Pass] data
automatically.
10.6.6.11 Seek2DBarcode (ONLY IN 7100)
By setting the [Seek2Dbarcode] to [True] will seek 2d barcode in
[C:\INTEL] in Repair Station, and replace the [PANEL_NO] with
2D barcode number.
Chapter 2 Repair Station Main Program
AOI Repair Station
61
10.6.6.12 Barcode Trace Ability
The function is to read one barcode and you can review the other
multi-board data.
System Structure
Step1. Custormer offers the *.brm file and saves it to
[C:\AOI_REPAIR_DATA\CombineBarcode] folder in
Repair Station.
Step2. AOI sends the inspection data to Repair Station.
Step3. Repair Station capture the *.brm file and replace the
barcode number to the multi-boards.
BRM file format
(1) File name－PANEL NO.brm
(2) File Format－Model Name;T/B;PANEL NO;count of X
axis;count of Y axis;2D1;2D2;2D3;2D4
(3) File Format Explanation
Model Name－ The model name.
T/B－Top or Bottom side.
PANEL NO－Input the barcode that represents the whole panel.
That is the barcode number scanned actually.
Count of X axis－For MxN multi-board, input M here.
Count of Y axis－For MxN multi-board, input N here.
2D1;2D2;2D3;2D4…－Those are the barcode number that you
want to read in. The sequence has to
follow the rule: left to right, up to
down.
(4) Take 2x2 boards for example.
File name－A001.brm
File contents－
MIS Barcode System
AOI
Repair Station
S
tep
3
S
tep
1
S
tep
2
A0001 B0002
C0003 D0004