00194081-01.pdf - 第127页
User Manual SIPLAC E CF 5 Tasks on the machine Software Version S R.408.xx 03/2006 US Edition 5.7 Refilling components 127 5.7 Refilling component s The onl ine help con tains infor mation on ref illing com ponents with …
5 Tasks on the machine User Manual SIPLACE CF
5.6 Avoiding track errors Software Version SR.408.xx03/2006 US Edition
126
5.6.3 Component coordinate system and pick-up angle
5
Fig. 5.6 - 1 Position of the component and its pick-up angle
Special
component
Stick
magazine:
Chip-
components
with polarity
0402
2220
The anode must be
aligned with the +X
coordinate.
Package
form type
Coordinate system
Position in the feeder
Pick-up angle/
nozzle angle
Tape:
SOT 23
Stick
magazine:
Tape:
Tape:
SO-IC
DIL-IC
SOT 194
Tape:
Holes
Y
X
Y
X
Y
X
Y
X
Y
X
90°
90°
0°
90°
-90°
0°
User Manual SIPLACE CF 5 Tasks on the machine
Software Version SR.408.xx 03/2006 US Edition 5.7 Refilling components
127
5.7 Refilling components
The online help contains information on refilling components with and without barcodes.
Æ With tape feeder modules, make sure that you always splice on a new tape early enough so
that the feeder modules do not run out of components.
Æ However, do not splice the tapes too early because if you wind the tape onto the new reel after
splicing the end of the old tape, the reel with the new tape may be overfilled. The tape could
then slip off the reel and become tangled. Under certain circumstances, this could cause pick-
up errors and prolonged down times.
Æ Always insert spindles when using tape reels of 15" (381 mm) and larger (see Fig. 5.3 - 3) and
make sure that the separating plates are inserted correctly (see Fig. 5.3 - 3
).
5 Tasks on the machine User Manual SIPLACE CF
5.8 Docking the component trolley in or out Software Version SR.408.xx03/2006 US Edition
128
5.8 Docking the component trolley in or out
5.8.1 Safety instructions on docking and undocking the component trolley
5
Fig. 5.8 - 1 Safety instructions on the component trolley