00194081-01.pdf - 第161页

User Manual SIPLAC E CF 6 Component han dling Software Vers ion SR.408.xx 03/2006 US Ed ition 6.3 Component trolley 161 6.3 Component trolley 6.3.1 Structure The com ponent tr olley cons ists esse ntially of a chassi s, …

6 Component handling User Manual SIPLACE CF

6.2 Technical data for the S feeder modules Software Version SR.408.xx 03/2006 US Edition

160

6.2.19.2 Technical data

Item no. 00117010-xx 6

Assigned locations 3 6

Component size Max. 36 x 36 mm²

depending on the placement head type 6

Possible coating thicknesses 25, 35, 45, 55, 65, 75 µm 6

Time required to change the coating thickness Less than 1 min. 6

Gap height tolerance ± 5 mm 6

Plate rotating speed Programmable from 0 - 10 sec.

in 0.1 sec. increments 6

Component dip time Programmable from 0 - 2 sec.

in 0.1 sec. increments 6

Flux Highly viscous flux, conductive adhesive 6

User Manual SIPLACE CF 6 Component handling

Software Version SR.408.xx 03/2006 US Edition 6.3 Component trolley

161

6.3 Component trolley

6.3.1 Structure

The component trolley consists essentially of a chassis, a component feeder table on which the

feeder is mounted, a communication unit, a tape container and a waste container. Docking the

component trolley in or out is described in Section 5.8

, page 128 onwards.

Fig. 6.3 - 1 Component trolley

(1) Component trolley

(2) Communication unit

(3) Control button for raising the component feeder table

(4) Component feeder table

(5) Handle for locking and lowering the component feeder table

(6) Tape container

(7) Waste tape container

NOTE ON OPERATIONAL SAFETY 6

All component trolleys must be docked on the machine in order to operate it. If they are not, the

machine stays in EMERGENCY STOP status. The placement process is interrupted. 6

6 Component handling User Manual SIPLACE CF

6.3 Component trolley Software Version SR.408.xx 03/2006 US Edition

162

6.3.2 Tape container

Reels up to 19" (483 mm) in diameter may be used. Insert spindles into the separating plates as

shown in Fig. 6.3 - 2

PLEASE NOTE 6

We recommend that you use spindles if the tape reel diameter exceeds 15" (381 mm). This will

ensure that the feeder modules operate reliably. 6

Fig. 6.3 - 2 Component trolley with tape container

(1) Component trolley

(2) Spindles

(3) Separating plate

(4) Tape container

6.3.3 Compressed air supply for bulk case feeder modules

Bulk case feeder modules require compressed air in order to work. A compressed air supply for

bulk case feeder modules is therefore available as an option.