00198365-03_UM_JTF-ML2_TX12_V1-V2_EN.pdf - 第28页
3 Technical data of the module 3.2 Overview – SIPLACE JTF-ML2 28 User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 Fig.22: Cassette for 7 trays (optional) SIPLACE JTF-ML2 Tray Cassette 7 [00588177-…
3 Technical data of the module
3.2 Overview – SIPLACE JTF-ML2
User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 27
3.2 Overview – SIPLACE JTF-ML2
Fig.20: SIPLACE JTF-ML2
SIPLACE JTF ML2 (Tray Feeder Module)
[00588116‑xx]
A)Tower
B)Conveyor
C)SIPLACE JTF‑ML2 adapter
1. Door
2. Handles
3. Pick position
Fig.21: Cassette for 9 trays (standard)
SIPLACE JTF-ML2 Tray Cassette 9
[00588199-xx]
The SIPLACE JTF-ML2 is delivered with two
cassettes for 9 trays as standard.
This cassette type can only house thin
JEDEC trays.
1. Shipping brace
2. Security spring
3. Handles
4. Guides for JEDEC trays
5. Direction lock
3 Technical data of the module
3.2 Overview – SIPLACE JTF-ML2
28 User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019
Fig.22: Cassette for 7 trays (optional)
SIPLACE JTF-ML2 Tray Cassette 7
[00588177-xx]
Cassettes for 7 trays can be ordered separ-
ately.
This cassette type can house thin (7.62mm)
and thick (12.19mm) JEDEC trays.
1. Transportation locks (2x)
2. Security spring
3. Handles
4. Guides for JEDEC trays
DANGER
Risk of crashing when using thick JEDEC trays
►
Do not use thick JEDEC trays in combination with C&P20P2 or CPP_L.
Otherwise, the head will be damaged.
4 Setting up and commissioning
4.1 Requirements and restrictions
User Manual SIPLACE TX V1/V2 Series JEDEC Tray Feeder (JTF-ML2) 11/2019 29
4 Setting up and commissioning
NOTICE
Example shown as diagram
The following diagrams are just examples. The procedure is the same for other machine
types than the SIPLACE TX1 / TX2-V1 / V2 shown. Any relevant differences will be men-
tioned explicitly.
4.1 Requirements and restrictions
The following requirements and restrictions apply to the SIPLACE JTF-ML2:
●
Assembly is only possible on SIPLACE TX1 and TX2 machines.
Assembly is not possible on SIPLACE TX2i machines.
●
The software version of a SIPLACE TX1/TX2 V1 machine must be 710.1 or higher. The soft-
ware version of a SIPLACE TX1/TX2 V2 machine must be 711.1 or higher.
●
The assembly is only possible at location 1.
●
The conveyor and the tower of the SIPLACE JTF-ML2 have the same ID number and must al-
ways be working as a pair.
It is not allowed to use a conveyor and a tower with different ID numbers.
Placement Heads
The following placement heads are possible:
●
CPP_H
●
TwinHead
From SIPLACE TX V2:
●
C&P20 P2
●
CPP_L
●
CPP M
Information on additional placement head variants are available upon request.
Also observe: 2.1.5 "Risk of crashing when using thick JEDEC trays" [}16]
Trays
NOTICE
Magnets with reduced height for Cookie Trays
When using magazine sheets (Cookie Trays), magnets with reduced height are required
[03160331‑xx]. For details, refer to the Technical Information "Magnet for JTF-ML2 Cookie
Tray" [DE:TI2019‑06D01] [EN:TI2019‑06E01].