00193790-01.pdf - 第97页

Installation and Getting Started with CACCIA 2 English Issue 07/2004 2.6 CACCIA Installation 31 2.6.4.2 Desktop Does Not Appear Possible causes and s olutions: 1. Che ck whethe r the scri pts have bee n installed and whe…

2 English Installation and Getting StartedwithCACCIA

2.6 CACCIA Installation Issue 07/2004

→ The Project Options dialog box will open:

Fig. 2 - 26 Project Options

→ Select the Directories tab. This shows which scripts will be loaded.

→ With the help of the example shown, link the scripts as follows - depending on your installation

target directory (e.g. C:\CACCIA\Shared):

– Include directory with the script path .. \Include\

– Script directory with the script path .. \Script\

– Data directory with the script path .. \Data\

→ Click on the Add Shared button and confirm your entries with OK.

Installation and Getting Started with CACCIA 2 English

Issue 07/2004 2.6 CACCIA Installation

2.6.4.2 Desktop Does Not Appear

Possible causes and solutions:

1. Check whether the scripts have been installed and whether their folders are correct. Perform

the following steps in the specified order:

2. Install the Toolbox scripts (see page 25)

3. Link the installed scripts (see page 29)

2.6.4.3 Could Not Execute CACCIA Functions

Incorrect CAN card selected.

Possible causes and solutions:

1. Check whether you have selected the correct CAN card on the CACCIA user interface.

2.6.4.4 Could Not Start CACCIA (Only in Windows NT)

Possible causes and solutions:

1. Check how CAN card installation and its connections.

2. Check the CAN driver status.

The CAN driver must be automatically loaded each time the PC/laptop is booted.

→ To ensure this happens, set the CAN driver start mode from Manual to Automatic in the

Windows NT Start → Settings → Control Panel → Devices menu.

→ The CAN driveris activatedeach timethe PC/laptop isbootedand can be used withoutthe

need for administrator rights.

3. Interrupt or address conflict (only with KVASER for laptop)

Check the interrupt settings and the port address. These details can be found at Windows NT

Diagnosis.

→ This function can be accessed from the Windows NT start menu, at Start →Program Files

→ Administrative Tools (Common) → Windows NT Diagnosis

→ Select the Resources tabtoviewtheinterrupt(IRQ) assignments and the port address

(Port).

→ To change these settings, you will need to rerun the CAN driver setup.

2 English Installation and Getting StartedwithCACCIA

2.7 Connecting CACCIA with SIPLACE Issue 07/2004

2.7 Connecting CACCIA with SIPLACE

In order to access SIPLACE from the laptop or PC, the computer concerned must be connected

to SIPLACE and the station. To do this, proceed as follows:

→ Start CACCIA. Open the Windows Start menu and select Program Files → CACCIA →

CACCIA or use the icon on your desktop.

→ Selectthe CANcard installedon yoursystemby clickingon the icon inthe main view. The

Advanced Subsystem Configuration dialog box will open.

Fig. 2 - 27 CACCIA - Advanced Subsystems Configuration

→ Select the CAN card installed in your laptop /PC from the Card list box.

→ Select the appropriate net for your chosen CAN card from the Net list box.