00196478-08_MM_SX12DX12_en.pdf - 第31页
Minor Maintenance 4.3.2 Performing Maintenance Tasks Maintenance Work on the Gantry Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 31 4.3.2.3 4 . 3 . 2 . 3 C le a n in g t h e Y A x is L o o s e B e a r in g a n d C o n t a …
Minor Maintenance
Maintenance Work on the Gantry 4.3.1 Tools, Consumables, Spare and Wear Parts
30 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2
4.3
4.3 Maintenance Work on the Gantry
Maintenance Work on the Gantry
4.3.1
4.3.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
▪ Lint-free cloths [03082092-xx]
▪ SIPLACE cleaning tissue [00315253-xx]
▪ Protective latex gloves [00372972-xx]
▪ Cotton gloves [00359087-xx]
▪ Set of Allen keys
▪ ESD wristband [00320279-xx]
4.3.2
4.3.2 Performing Maintenance Tasks
Performing Maintenance Tasks
See also
1.1.6 Safety Instructions for the Gantry [ ➙ 9]
1.1.2 Safety Instructions for Working with Strong Magnetic Fields [ ➙ 8]
4.3.2.1
4.3.2.1 Checking and Cleaning the Magnetic Surfaces of the X and Y Axes
Checking and Cleaning the Magnetic Surfaces of the X and Y Axes
4.3.2.2
4.3.2.2 Cleaning the X Axis Loose Bearing and Contact Surface
Cleaning the X Axis Loose Bearing and Contact Surface
► Clean the magnetic surfaces of the X (2) and Y (1)
axes thoroughly over their entire length. Use a lint-
free cloth to remove any dirt from the magnetic sur-
faces. Where necessary, remove components with a
non-magnetic tool.Where necessary, remove compo-
nents with a non-magnetic tool.
► In the event of damage or other problems, please
contact your SIPLACE Service team in Munich.
CAUTION!
Do not use any chemical cleaning agents!
► Use a SIPLACE cleaning tissue to wipe the loose
bearing (1) for the X axis and its contact surface (2) .
► Repeat these steps for the loose bearing on the other
side of the head mount.
► Repeat these steps for all gantries.
Minor Maintenance
4.3.2 Performing Maintenance Tasks Maintenance Work on the Gantry
Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 31
4.3.2.3
4.3.2.3 Cleaning the Y Axis Loose Bearing and Contact Surface
Cleaning the Y Axis Loose Bearing and Contact Surface
CAUTION!
Do not use any chemical cleaning agents!
► Use a dry, lint-free cloth to wipe the two Y axis loose
bearings at (1) and (2) and their contact surface (3).
► Repeat these steps for all gantries.
Minor Maintenance
Maintenance Tasks for Nozzles 4.4.1 Tools, Consumables, Spare and Wear Parts
32 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2
4.4
4.4 Maintenance Tasks for Nozzles
Maintenance Tasks for Nozzles
4.4.1
4.4.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
Consumables Item no. HMK
SIPLACE recommends that you use the following cleaning fluids from
ZESTRON (http://www.zestron.com):
▪ VIGON SC 200
Compressed air
Distilled water
Tools Item no. HMK
ESD wriststrap 00320279- xx
SIPLACE recommends that you use the following ultrasound device and
accessory parts from BANDELIN electronic (http://www.bandelin.com):
▪ Ultrasound device SONOREX SUPER RK 510 [order no. Bandelin:
327]
▪ Clip-on basket K 10 [order no. Bandelin: 359]
▪ Handle adjustment GV 10 for baskets (1 pair) [order no. Bandelin: 092]
▪ Lid D 510 [order no. Bandelin: 3008]
Nozzles 10xx, 12xx, 20xx, 28xx, 40xx According to
configuration
Ceramic nozzles 10xx, 12xx, 20xx, 28xx, 40xx According to
configuration
If required, nozzle magazine type 40xx (for C&P20 P)
(Replaces: magazine assembly C&P20 [03016831-xx])
03101503- xx
If required, nozzle magazine type 20xx (depending on configuration) 03066107- xx
Plastic brush Dm 8 00325866- xx
For C&P20/A/M/P and CPP
Guiding plate long for 10xx/20xx
► Note: When using ceramic nozzles for the CPP, you need the guide
plate with function state 02.
03066508- xx
Cleaning box for ceramic nozzles, type 20xx/long (for CPP) 03076627- xx
Cleaning box ceramic nozzles type 10xx/long (for C&P20/A/M) 03055736- xx
Cleaning box ceramic nozzles type 40xx/long (for C&P20 P) 03107651- xx
Cleaning rack 10xx (for C&P20/A/M and CPP), if required 03071700- xx
For DLM
Guiding plate short 03029178- xx
Cleaning box for ceramic nozzles, type 9xx 03003183- xx
Cleaning box for ceramic nozzles, type 30xx 03087685- xx