00196478-08_MM_SX12DX12_en.pdf - 第32页

Minor Maintenance Maintenance Tasks for Nozzles 4 .4.1 Tools, Consumables, Spare an d Wear Parts 32 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 4.4 4 . 4 M a in t e n a n c e T a s k s f o r N o z z le s Maintenance Tasks…

100%1 / 80
Minor Maintenance
4.3.2 Performing Maintenance Tasks Maintenance Work on the Gantry
Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 31
4.3.2.3
4.3.2.3 Cleaning the Y Axis Loose Bearing and Contact Surface
Cleaning the Y Axis Loose Bearing and Contact Surface
CAUTION!
Do not use any chemical cleaning agents!
► Use a dry, lint-free cloth to wipe the two Y axis loose
bearings at (1) and (2) and their contact surface (3).
► Repeat these steps for all gantries.
Minor Maintenance
Maintenance Tasks for Nozzles 4.4.1 Tools, Consumables, Spare and Wear Parts
32 Maintenance Manual SIPLACE SX1/SX2/DX1/DX2
4.4
4.4 Maintenance Tasks for Nozzles
Maintenance Tasks for Nozzles
4.4.1
4.4.1 Tools, Consumables, Spare and Wear Parts
Tools, Consumables, Spare and Wear Parts
Consumables Item no. HMK
SIPLACE recommends that you use the following cleaning fluids from
ZESTRON (http://www.zestron.com):
▪ VIGON SC 200
Compressed air
Distilled water
Tools Item no. HMK
ESD wriststrap 00320279- xx
SIPLACE recommends that you use the following ultrasound device and
accessory parts from BANDELIN electronic (http://www.bandelin.com):
▪ Ultrasound device SONOREX SUPER RK 510 [order no. Bandelin:
327]
▪ Clip-on basket K 10 [order no. Bandelin: 359]
▪ Handle adjustment GV 10 for baskets (1 pair) [order no. Bandelin: 092]
▪ Lid D 510 [order no. Bandelin: 3008]
Nozzles 10xx, 12xx, 20xx, 28xx, 40xx According to
configuration
Ceramic nozzles 10xx, 12xx, 20xx, 28xx, 40xx According to
configuration
If required, nozzle magazine type 40xx (for C&P20 P)
(Replaces: magazine assembly C&P20 [03016831-xx])
03101503- xx
If required, nozzle magazine type 20xx (depending on configuration) 03066107- xx
Plastic brush Dm 8 00325866- xx
For C&P20/A/M/P and CPP
Guiding plate long for 10xx/20xx
► Note: When using ceramic nozzles for the CPP, you need the guide
plate with function state 02.
03066508- xx
Cleaning box for ceramic nozzles, type 20xx/long (for CPP) 03076627- xx
Cleaning box ceramic nozzles type 10xx/long (for C&P20/A/M) 03055736- xx
Cleaning box ceramic nozzles type 40xx/long (for C&P20 P) 03107651- xx
Cleaning rack 10xx (for C&P20/A/M and CPP), if required 03071700- xx
For DLM
Guiding plate short 03029178- xx
Cleaning box for ceramic nozzles, type 9xx 03003183- xx
Cleaning box for ceramic nozzles, type 30xx 03087685- xx
Minor Maintenance
4.4.2 Nozzle Magazines - Overview Maintenance Tasks for Nozzles
Maintenance Manual SIPLACE SX1/SX2/DX1/DX2 33
4.4.2
4.4.2 Nozzle Magazines - Overview
Nozzle Magazines - Overview
1. Cleaning box 9xx [03003183-xx]
2. Guiding plate for cleaning box DLM [03029178-xx]
3. Cleaning box 10xx long [03055736-xx]
4. Guiding plate 10xx/20xx long [03066508-xx]
5. Cleaning box 20xx long [03076627-xx]
6. Cleaning rack 10xx [03071700-xx]
7. Cleaning box 30xx [03087685-xx]
8. Cleaning box 40xx [03107643-xx]
9. Guide plate 40xx [03107657-xx]