00196428-0102_AI_Reconfig_Kit_X-Serie_CPP_DE+EN.pdf - 第89页
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP fo r the SIPLACE X Ser ies Issue 03/2010 2.7 Installing the CPP Placement H ead 89 2.7.3 Inst alling the Adapter Board X Connect the CPP/A364 …
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.7 Installing the CPP Placement Head Issue 03/2010
88
2.7.2.3 Installing the Upgrade Kit Fast Head Exchange
(On Machines Delivered before June 2009)
X If necessary, install the upgrade kit Fast Head Exchange [03073841-xx].
(on machines that were delivered before June 2009)
2
Retaining bracket 2
Head Reconfiguration Kit 2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series
Issue 03/2010 2.7 Installing the CPP Placement Head
89
2.7.3 Installing the Adapter Board
X Connect the CPP/A364 PCB/Head adapter [03077980-xx] to the head interface and fix the
board with 6 DIN912 M3x6 - A2 screws [00201463-xx] to the head plate.
2
NOTE:
When switching from C&P20 to CPP the head board must not be changed. However, the
cable holder must be detached for the CPP. 2
Head adapter board
6 screws
Cable clip
Hexagonal bolt
2 Assembly Instructions Head Reconfiguration Kit CPP for the SIPLACE X Series Head Reconfiguration Kit
2.7 Installing the CPP Placement Head Issue 03/2010
90
2.7.4 Installing the Placement Head
2.7.4.1 Installing the Component Camera
2
CAUTION:
Use the universal head stand [00363290-xx] when installing the camera. 2
Never place the head onto the component sensor, because in doing so you risk dama-
ging it. 2