00197186-01_IM_Celsius_W380_Recovery_Image_EN.pdf - 第15页
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition Figure 3-13: First Login after Installation ► Login with the SIPLACEAdmin account and the passwo rd you specified. ► Before you continue preparing the system …
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
Figure 3-11: SIPLACE Network Configuration screen
► Verify and enter the correct IP configuration for your SIPLACE LAN connected network card.
► Click OK.
Figure 3-12: System reboot message
► Wait until your system is rebooted.
14
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
Figure 3-13: First Login after Installation
► Login with the SIPLACEAdmin account and the password you specified.
► Before you continue preparing the system with Support Media, ensure you check the
configuration as described in the document "Required Steps before using Support Media",
item no. 00197185-xx.
15
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
4 Installation of Windows XP Recovery Media
The following chapter describes the installation of SIPLACE Windows XP Recovery Media on
Celsius W380.
► First, connect the external PCI Network adapter with your SIPLACE network and leave the
other (onboard) network adapter disconnected.
NOTICE
Network Adapter Identification
For simple identification of the appropriate SIPLACE LAN network adapter later after
installation, it is strongly recommended to disconnect all other adapters.
► Power up the computer and insert the SIPLACE Windows 7 Recovery DVD into the drive.
The message Press any key to boot from CD or DVD appears if you already have an
Operating System installed.
If this happens, ensure that you have backed up all necessary data, and then press any key to boot
from the DVD.
After booting from the DVD, the following screen should be visible.
Figure 4-1: SIPLACE Windows XP Recovery DVD first question
► Click Yes to continue with the installation.
16