00197186-01_IM_Celsius_W380_Recovery_Image_EN.pdf - 第29页
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition After a while, a message similar to the following picture will be shown. Figure 4-18: SIPLACE Network Configuration screen ► Verify and enter the correct IP c…
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
CAUTION
Account with empty Password created
Since Windows XP Setup doesn’t allow setting a password for the given account(s), you
have to set it manually after installation! This is described in the documentation
“Required Steps before using Support Media”, item no. 00197185-xx.
Figure 4-17: Finish dialog
► Click Finish to finalize Windows Setup.
Windows will continue with preparation and reboot.
28
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
After a while, a message similar to the following picture will be shown.
Figure 4-18: SIPLACE Network Configuration screen
► Verify and enter the correct IP configuration for your SIPLACE LAN connected network card
(Connection to SR)
► Click the OK button.
After a while the system will initiate a reboot and log you in automatically. You’ve completed the
main steps for installation.
CAUTION
Before you continue
Before you continue preparing the system with Support Media, ensure that you check the
configuration as described in the document “Required Steps before using Support
Media”, item no. 00197185-xx.
29
SIPLACE Recovery Installation on Celsius W380 10/2011 Edition
4.1 Problems with Graphics Driver in XP Recovery Image
On some Celsius W380 computers, we found a problem of slow graphics processing. This is
caused by the disabled graphics driver in the device manager. You have to enable it again for best
performance.
► Login with administrative permissions.
Figure 4-19: Clicking on Start - Run
► Click on Start – Run or press the WINDOWS + R keys.
Figure 4-20: Entering Computer Management
► Enter the compmgmt.msc command and press the ENTER key.
30