52339001系统-2.pdf - 第12页
Page 10 52339001 Rev . C Installing eComStation fr om a Disk Image This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher. 3. Type Ctrl+F ; a Find dialog displays. 4. Type reserv in the Find dialog. …
Page 9
Installing eComStation from a Disk Image 52339001 Rev. C
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
4. Select the round X at the upper right of the Screen dialog.
5. Select the Exit button at the lower left of the main Post-Installation
Tasks dialog.
A command window displays briefly; wait until it closes.
10. Remove Installation Disc
This completes the basic process of installing eComStation 2.2 on the system.
Remove the eComStation disc from the drive.
11. Set Up Desktop Properties
This procedure configures the desktop settings.
1. Right-click an empty area of the desktop.
2. Choose Properties from the pop-up menu that displays. The Desktop
dialog displays with a row of tabs at the top.
3. Select the eShutdown tab.
4. Select the Power-off computer check box, and remove the X.
5. Select the Animation before shutdown check box, and remove the X.
6. Select the Screen Saver tab.
7. Use the mouse to stretch the dialog a bit higher at the top so all the
options can be seen.
8. Select the Screen saving enabled check box, and remove the X.
9. Select the round X at the upper right of the Desktop dialog to close the
window.
12. Remove Reserved Drive Letter
To remove the reserved drive letter, do the following:
1. Go to the toolbar at the bottom of the screen, and select the
Command Prompts icon.
2. Type e config.sys, and press Enter.
A text editing window displays showing the contents of the
“config.sys” file.
Page 10
52339001 Rev. C Installing eComStation from a Disk Image
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
3. Type Ctrl+F; a Find dialog displays.
4. Type reserv in the Find dialog.
5. Press Enter or select Find. The editor will find a particular line in the
“config.sys” file that needs to be changed.
6. Press the Esc key to dismiss the Find dialog.
7. Press the Home key to move the cursor to the start of the line in the
file.
8. Type the letters rem followed by a space.
9. Select Save from the File menu.
10. Select Exit from the File menu. The Command Prompt Window
displays again.
11. Type Exit, and press Enter to close this function.
13. Delete Unused Desktop Widgets
The next task is to remove all the “widgets” from the bottom of the screen.
1. Right-click on each of the following widgets, and select Delete
Widget.
2. Right-click on the empty space in the right side of the bar of these
widgets:
3. Select Delete Widget.
4. Select Yes to confirm.
Page 11
Installing eComStation from a Disk Image 52339001 Rev. C
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
5. Verify the revised desktop, as the basic desktop configuration is now
complete.
The desktop should look like the following:
14. Set Up the Toolbar
The next task is to set up the Toolbar to start automatically.
1. Double-click Programs.
2. Double-click Utilities.
3. Right-click on the Toolbar icon.
4. Select Copy from the pop-up menu that displays.
5. Select the Desktop tab.
6. Select the + sign next to Local System to expand that node of the tree.
7. Select the Startup node of the tree.
8. Select Copy. The Copy dialog will operate, then will automatically be
dismissed.
9. Select the round X in the upper right to close the Utilities window.
10. Select the round X in the upper right to close the Programs window.