52339001系统-2.pdf - 第7页
Page 5 Installing eComStation fr om a Disk Image 52339001 Rev . C This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher. 3. Select OK . A message displays indicating shutdown has completed. 4. Type …
Page 4
52339001 Rev. C Installing eComStation from a Disk Image
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
c. Press Enter.
d. Press Esc.
5. Place the appropriate eComStation CD or DVD in the drive.
6. Press F4, then press Enter. Wait for the eComStation boot prompt to
display.
7. Select the following in the first screen that displays:
a. Select Boot from eComStation CD-ROM.
b. Press Enter.
8. Select the following in the second screen that displays:
a. Select Boot with default values.
b. Press Enter.
9. Verify that Keyboard layout is set to US-English. (The appropriate
defaults should already be set.)
10. Select Next.
11. Accept the License Agreement, and select Next.
A message displays, “Checking disk integrity. Please wait…”
12. Determine the next action:
• If the hard disk in the system is not new, it should pass the integrity
check. Do the following:
a. Verify Easy Installation is selected.
b. Select Next. Continue with the next procedure.
• If the hard disk in the system is new, it will fail the integrity check.
In this case, continue with the next procedure.
2. Set Up the HDD Partition (New Hard Disk
Only)
If the hard disk in the system is new, it will fail the integrity check, and a
message displays indicating there are no partitions on the drive.
Do the following:
1. Select Fix Problems. A confirmation dialog displays.
2. Select Close. A message displays indicating a reboot is required.
Page 5
Installing eComStation from a Disk Image 52339001 Rev. C
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
3. Select OK. A message displays indicating shutdown has completed.
4. Type Ctrl+Alt+Del to reboot the PC. Wait for the reboot to complete.
5. Select Boot from eComStation CD-ROM, and press Enter.
6. Select Boot with default values, and press Enter.
7. Process the keyboard settings and license agreement again as follows:
a. Select Next. (The appropriate defaults should already be set.)
b. Accept the License Agreement, and select Next.
A message will display that reads “Checking disk integrity.
Please wait…”
No disk problems should be found.
8. Verify Easy Installation is selected.
9. Select Next. Continue with the next procedure.
3. Enter Registration Information
Enter the standard serial number by selecting the boxes and typing as
follows:
1. Turn on Caps Lock to perform this operation more easily.
2. Select the Registration Name field, and type in the information from
the CD/DVD:
The dash that is part of the name must be typed.
3. Select the Registration Key field, and type in the information from
the CD/DVD:
(Do not use the Tab key to advance from field to field; the cursor will
advance from field to field automatically.)
When all information is entered properly, the Next button will become
available.
4. Select Next to continue.
4. Set Up Installable Volume (New Hard Disk
Only)
The system will now state that there is no installable volume available. This
is normal.
Page 6
52339001 Rev. C Installing eComStation from a Disk Image
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
For a new hard disk, do the following:
1. Select OK to launch the Volume Manager.
2. Select Volume > Create New. A pop-up dialog displays.
3. In the first pop-up dialog, do the following:
a. Ensure Standard (bootable) volume is selected.
b. Select Next.
4. In the second pop-up dialog, do the following:
a. Ensure the Letter field has C selected.
b. Turn off Caps Lock if it is on.
c. Select the Name field, and type System, and select Next.
5. In the third pop-up dialog, do the following:
a. Select the Volume size field, and type 60000 (sixty thousand).
b. Select Finish. Volume Manager will now show the newly-
created “C” drive.
6. Select System > Save changes or press F2. A confirmation dialog
displays.
7. Select Yes.
8. Select the System > Exit or press F3. The Volume Manager window
closes.
9. Select Next to continue.
5. Format Drive, Set Time, Configure Hardware
In this procedure, the “C” partition will be formatted, Daylight Savings Time
will be set, and the hardware will be configured.
1. Select File System > High Performance File System.
2. Remove the X from Check for errors while formatting.
3. Select Format.