52339001系统-2.pdf - 第8页
Page 6 52339001 Rev . C Installing eComStation fr om a Disk Image This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher. For a new hard disk, do the following: 1. Select OK to launch the Volume Mana…
Page 5
Installing eComStation from a Disk Image 52339001 Rev. C
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
3. Select OK. A message displays indicating shutdown has completed.
4. Type Ctrl+Alt+Del to reboot the PC. Wait for the reboot to complete.
5. Select Boot from eComStation CD-ROM, and press Enter.
6. Select Boot with default values, and press Enter.
7. Process the keyboard settings and license agreement again as follows:
a. Select Next. (The appropriate defaults should already be set.)
b. Accept the License Agreement, and select Next.
A message will display that reads “Checking disk integrity.
Please wait…”
No disk problems should be found.
8. Verify Easy Installation is selected.
9. Select Next. Continue with the next procedure.
3. Enter Registration Information
Enter the standard serial number by selecting the boxes and typing as
follows:
1. Turn on Caps Lock to perform this operation more easily.
2. Select the Registration Name field, and type in the information from
the CD/DVD:
The dash that is part of the name must be typed.
3. Select the Registration Key field, and type in the information from
the CD/DVD:
(Do not use the Tab key to advance from field to field; the cursor will
advance from field to field automatically.)
When all information is entered properly, the Next button will become
available.
4. Select Next to continue.
4. Set Up Installable Volume (New Hard Disk
Only)
The system will now state that there is no installable volume available. This
is normal.
Page 6
52339001 Rev. C Installing eComStation from a Disk Image
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
For a new hard disk, do the following:
1. Select OK to launch the Volume Manager.
2. Select Volume > Create New. A pop-up dialog displays.
3. In the first pop-up dialog, do the following:
a. Ensure Standard (bootable) volume is selected.
b. Select Next.
4. In the second pop-up dialog, do the following:
a. Ensure the Letter field has C selected.
b. Turn off Caps Lock if it is on.
c. Select the Name field, and type System, and select Next.
5. In the third pop-up dialog, do the following:
a. Select the Volume size field, and type 60000 (sixty thousand).
b. Select Finish. Volume Manager will now show the newly-
created “C” drive.
6. Select System > Save changes or press F2. A confirmation dialog
displays.
7. Select Yes.
8. Select the System > Exit or press F3. The Volume Manager window
closes.
9. Select Next to continue.
5. Format Drive, Set Time, Configure Hardware
In this procedure, the “C” partition will be formatted, Daylight Savings Time
will be set, and the hardware will be configured.
1. Select File System > High Performance File System.
2. Remove the X from Check for errors while formatting.
3. Select Format.
Page 7
Installing eComStation from a Disk Image 52339001 Rev. C
This document supports eComStation 2.x and higher and IM-UPS 6.0 and higher.
4. Select Start in the warning dialog that displays.
It will take about 8 minutes to format the partition. During this process,
the progress indica-tor will move only a few times and may seem to be
“stuck” at one spot for long periods of time. This is NORMAL; activity
can be verified by observing the hard drive LED.
5. Select OK when the formatting operation completes.
6. Set up the Daylight Savings Time as follows:
a. Add an X in the Daylight Savings Time is used check box.
(This is for English.)
b. Select Next.
7. To configure the hardware, do the following:
a. Select Next (all defaults should already be defined correctly).
b. Select No Audio Adapter > Next.
8. Continue with the next procedure.
6. Configure Network
To configure the network, do the following:
1. Select Next (all defaults should already be defined correctly).
2. Select Next (all defaults should already be defined correctly).
3. Select the Workstation ID field, and replace with the appropriate
identifier for the machine.
4. Select the LAN Domain field, and do one of the following:
• If on a domain, replace “WORKGROUP with the appropriate
domain name.
• If not on a domain, do not change the field.
5. Select Next. The initial configuration of the system is now complete.