[Superset] Chapter5_SPC Plus_ENG_20100827TW.pdf - 第28页

Programmer's Manual | 28 Category Description Chart/Histogram Selects viewi ng either in chart or histogram Histogram V alue From the X V alue and S V alue , selects a corresponding category  X V alue: V olume, Are…

Programmer's Manual | 27

3.6.1.2. Six-Chart Mode

Thismodeisusedforqueryingtheentiredataof6chartsonthemainscreen.SelectSixChartfrom

theselectionwindowatthebottomoftheMRTChartscreen.

Figure 3-11. Multi-SPC – Six-Chart Mode

3.6.2. ADDING X VALUE & S VALUE HISTOGRAM

Programmer's Manual | 28

Category Description

Chart/Histogram Selects viewing either in chart or histogram

Histogram Value

From the X Value and S Value, selects a corresponding category

 X Value: Volume, Area, and Height value

 S Value: Standard deviation

Histogram Bar Size Selects the range of histogram

List Export Saves the currently displayed chart values in file format

ToaddanXVALUEoranSVALUEHistogram,proceedwiththefollowing:

1. Select Histogram from the selection window at the bottom of MRT Chart screen.

2. From X Value and S Value, select the desired category.

Programmer's Manual | 29