00196841-01_IM_TX300S6_Win2008R2_SP1_EN.pdf - 第16页
Installing Primergy TX300S6 with Wind ows Server 2 008R2 SP 1 07/2011 Edition ► For RAID level , select "5". NOTICE Select/change RAID opti ons carefully In this manual, RAID level 5 is used for a good compromi…
Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition
► In each of the dropdown boxes, select Windows, MS Windows Server 2008 R2, Windows
Server 2008 R2 Standard, Service Pack 1 as displayed in the figure above.
► Click the Next button at the bottom of the screen.
The Configuration of Disks and RAID Controllers screen appears.
Figure 3-9: Configuration of Disks and RAID Controllers screen with default options
► Modify the default settings as displayed in the following figure.
Figure 3-10: Configuration of Disks and RAID Controllers screen with custom options
15
Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition
► For RAID level, select "5".
NOTICE
Select/change RAID options carefully
In this manual, RAID level 5 is used for a good compromise between performance and
data security. RAID 5 requires three hard disks at least. In most cases, changing the
RAID level afterwards causes existing data on the involved disks to get lost. So, you
should ensure to select the proper RAID level first before setting up the computer with
important data. For more information on RAID levels, please consult the manual for your
RAID controller or search in internet for RAID documentation.
► For Boot Partition Size, select "manual" and enter the value "150000" MB to reserve about 150
GB for the boot partition (the Windows "C:" drive).
NOTICE
Whole disk with single partition
If you leave the default settings for boot partition size, a single partition containing the
whole disk will be created. After that, you will have to use a partition manager tool if you
want to split the system into more partitions.
► Click the Next button at the bottom of the screen to continue.
The next configuration screen appears.
Figure 3-11: Settings screen with additional options
► Enter a name for the user and organization.
This information will only be used for registration information – no account will be generated.
► Enter the name for the computer as required.
16
Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition
NOTICE
Ensure that the computer name is valid!
Please select the computer name carefully. Some products, like SQL Server strongly
depend on the computer name and may stop working when you change it afterwards!
► Leave the Product ID field blank.
► Enter the password for the administrator. For SIPLACE default installations please see the
technical information TI2008-04V08 that lists all SIPLACE default passwords.
► Select the appropriate time zone.
► Select English for the Regional and Language Options.
► Select the radio button besides autoconfiguration in the Internet Protocol Version 6 field.
► In the Internet Protocol Version 4 field :
► Select no besides DHCP.
► Enter the IP- Address for the SIPLACE LAN connection besides IP-Address.
► Enter the appropriate mask besides Subnet-Mask. In this documentation, "255.255.0.0" is
used.
► In most cases, there is no valid gateway in the SIPLACE LAN, thus leave the Gateway field
blank.
► Click the Next button to continue.
An error message is displayed, prompting you to enter a gateway:
Figure 3-12: Installation Manager prompts to enter a gateway
► Click OK to accept the message.
► For now, enter "127.0.0.1" for the gateway and click the Next button.
17