00196841-01_IM_TX300S6_Win2008R2_SP1_EN.pdf - 第18页

Installing Primergy TX300S6 with Wind ows Server 2 008R2 SP 1 07/2011 Edition Figure 3-13: Dummy- Gateway 127.0.0.1 ente red CAUTION Wrong defaul t gateway To proceed with the installation, the val ue 127.0.0.1 was enter…

Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition

NOTICE

Ensure that the computer name is valid!

Please select the computer name carefully. Some products, like SQL Server strongly

depend on the computer name and may stop working when you change it afterwards!

► Leave the Product ID field blank.

► Enter the password for the administrator. For SIPLACE default installations please see the

technical information TI2008-04V08 that lists all SIPLACE default passwords.

► Select the appropriate time zone.

► Select English for the Regional and Language Options.

► Select the radio button besides autoconfiguration in the Internet Protocol Version 6 field.

► In the Internet Protocol Version 4 field :

► Select no besides DHCP.

► Enter the IP- Address for the SIPLACE LAN connection besides IP-Address.

► Enter the appropriate mask besides Subnet-Mask. In this documentation, "255.255.0.0" is

used.

► In most cases, there is no valid gateway in the SIPLACE LAN, thus leave the Gateway field

blank.

► Click the Next button to continue.

An error message is displayed, prompting you to enter a gateway:

Figure 3-12: Installation Manager prompts to enter a gateway

► Click OK to accept the message.

► For now, enter "127.0.0.1" for the gateway and click the Next button.

Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition

Figure 3-13: Dummy- Gateway 127.0.0.1 entered

CAUTION

Wrong default gateway

To proceed with the installation, the value 127.0.0.1 was entered for the default gateway.

Please keep in mind to remove this IP configuration setting after installation, since wrong

default gateway settings cause network routing problems! Additionally, only existing

gateways should be entered.

The next screen displays the summary.

Installing Primergy TX300S6 with Windows Server 2008R2 SP 1 07/2011 Edition

Figure 3-14: Installation configuration summary

► Click on Start Installation to begin the installation.

During installation, the system reboots several times.

Figure 3-15: Boot process picture #1