192277 - Micron Technical Reference V9 Volume 1.pdf - 第22页
INTRODUCTION SOFTWARE/HARDWARE CONFIGU RATIONS 1.12 Technical Reference M anual Chapter Issue 13, May 19 Software Release V ersion 9 SP14 Software Hardware No hardware enhancements. Software Release V ersion 9 SP15 -17 S…
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 13, May 19 Technical Reference Manual 1.11
Software Release Version 9 SP11
Software
Hardware No hardware enhancements added.
Software Release Version 9 SP12
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13 P04
Software
Hardware
Feature Detail
GEM Improved functionality
Defect Fixes Various
Feature Detail
SMEMA Good Board/Bad Board Enhancements for down line transfers
Power Monitor Software Improved PSU voltage monitoring
Defect Fixes Various
Feature Detail
Double Alignment Option This option can enable improvements to the alignment
accuracy.
Defect Fixes Various
Feature Detail
Defect Fixes Various
Feature Detail
Style 2 Rising Table ASM are continuously using qualitative methodologies
such as Lean Manufacturing to reduce waste and Six
Sigma to increase quality linking to improve manufac-
turing productivity
Underscreen Cleaner Size Options 300,400 and 520mm cleaning options available
Barcode Reader Configuration
Cards
Updated configuration cards to improve read quality
Rear Rail Parallelism New setting jig added
Chase Sensor Replaced thru-beam opto sensor with a reflective type
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.12 Technical Reference Manual Chapter Issue 13, May 19
Software Release Version 9 SP14
Software
Hardware No hardware enhancements.
Software Release Version 9 SP15 -17
Software
Hardware Hardware options.
Software Release Version 9 SP18
Software
Hardware Hardware options.
Feature Detail
Operating System Software updated to work on Windows 7 Embedded
and Windows XP Embedded systems
QC Calc Newer version of QC Calc capable of running on Win-
dows 7 Embedded
Defect Fixes Various
Feature Detail
Cyclone Duo Underscreen Cleaner Support for the dual chamber Cyclone USC. This unit
allows a fabric wetting and vacuum process all in the
same sweep
Process Expert The line process self learning SMT expert system
Verification and Traceability Updated version (V2)
APC All Purpose Clamping system software support
Line Control MES PCB and Recipe controlled verification
SIPLACE OIS The configurable Operator Information System is used
to tailor the output
Feature Detail
Cyclone Duo Underscreen Cleaner Dual Chamber Cyclone USC
APC All Purpose Clamping hardware
Feature Detail
Hermes FMI Protocol A station-to-station communication IP
Operator Assist Interface Line control functionality
Feature Detail
MicroHawk Barcode Reader Remote barcode reader replacement
Anti-Vibration Mounts Used to isolate the covers from the printer chassis
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 13, May 19 Technical Reference Manual 1.13
Software Release Version 9 SP19
Software
Hardware Hardware options.
Feature Detail
Stinger Programmable Paste Pot location
Dual Barcode Reader Extends the read capabilities for barcodes placed on
either the top or the bottom of the product
Camera Barcode Reader Allows the camera to be set up to read barcodes
Feature Detail
Dual Barcode Reader Extends the read capabilities for barcodes placed on
either the top or the bottom of the product
Self Adjusting Paste Deflectors Spring loaded deflectors that self adjust to surface con-
ditions