192277 - Micron Technical Reference V9 Volume 1.pdf - 第23页
INTRODUCTION SOFTWARE/HARDWARE CONFIGURATIONS Chapter Issue 13, May 19 Technical Reference Manual 1.13 Software Release V ersion 9 SP19 Software Hardware Hardware options. Feature Detail Stinger Programmable Paste Pot lo…
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.12 Technical Reference Manual Chapter Issue 13, May 19
Software Release Version 9 SP14
Software
Hardware No hardware enhancements.
Software Release Version 9 SP15 -17
Software
Hardware Hardware options.
Software Release Version 9 SP18
Software
Hardware Hardware options.
Feature Detail
Operating System Software updated to work on Windows 7 Embedded
and Windows XP Embedded systems
QC Calc Newer version of QC Calc capable of running on Win-
dows 7 Embedded
Defect Fixes Various
Feature Detail
Cyclone Duo Underscreen Cleaner Support for the dual chamber Cyclone USC. This unit
allows a fabric wetting and vacuum process all in the
same sweep
Process Expert The line process self learning SMT expert system
Verification and Traceability Updated version (V2)
APC All Purpose Clamping system software support
Line Control MES PCB and Recipe controlled verification
SIPLACE OIS The configurable Operator Information System is used
to tailor the output
Feature Detail
Cyclone Duo Underscreen Cleaner Dual Chamber Cyclone USC
APC All Purpose Clamping hardware
Feature Detail
Hermes FMI Protocol A station-to-station communication IP
Operator Assist Interface Line control functionality
Feature Detail
MicroHawk Barcode Reader Remote barcode reader replacement
Anti-Vibration Mounts Used to isolate the covers from the printer chassis
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 13, May 19 Technical Reference Manual 1.13
Software Release Version 9 SP19
Software
Hardware Hardware options.
Feature Detail
Stinger Programmable Paste Pot location
Dual Barcode Reader Extends the read capabilities for barcodes placed on
either the top or the bottom of the product
Camera Barcode Reader Allows the camera to be set up to read barcodes
Feature Detail
Dual Barcode Reader Extends the read capabilities for barcodes placed on
either the top or the bottom of the product
Self Adjusting Paste Deflectors Spring loaded deflectors that self adjust to surface con-
ditions
INTRODUCTION
GLOSSARY
1.14 Technical Reference Manual Chapter Issue 13, May 19
GLOSSARY
Term Definition
2D Inspection 2D Inspection is a software feature which utilizes the printer vision system to detect print medium
deposits on the board or the stencil.
Actuator A motor and leadscrew assembly utilized to drive a mechanical device in a given direction.
Asset Management A range of tools employed in the process of printer maintenance; includes a module that provides
a wireless real time connection from the DEK printer to the ASM call centre for fault diagnosis.
Camsafe Switch Safety interlock switch mounted on an opening printhead cover.
CAN Controller Area Network. The CAN is a bus system for printer motion control. The CAN is a 2 wire
data link designed for transmission of small data packets for fast update of axis position
information.
CCD Charge-Coupled Device. An integral circuit that responds to light. Consisting of MOS (metal-oxide
semiconductor) photosensitive capacitors arranged in a regular array, producing a corresponding
voltage and hence charge proportional to the light’s intensity.
Chase The moving frame within the screen alignment module holding the print stencil.
Cp A term used in statistical analysis to represent Process Capability (repeatability).
Cpk A term used in statistical analysis to represent accurate repeatability.
Crate British term describing an electronic enclosure.
Downline A term referring to an item or piece of equipment within a production line situated after the DEK
printer moving in the direction of the line towards the end.
E Stop Emergency stop button. An electrical safety switch providing automatic shut down of equipment.
Diagnostics A fault finding aid in software. Enables a technician to individually control the motors, sensors and
switches throughout the printer.
Fiducial Geometric alignment mark on the board and the stencil.
Field of View Area of the image seen through the camera lens.
FMI Foreign Machine Interface. Electronic means of communication with adjacent printers.
GUI Graphical User Interface. An enhanced DEK interface utilized in the 2D inspection, portraying a
realistic representation of a board being inspected.
Host Comms Host Comms provides the user with access to certain networking functions without accessing the
printer maintenance function.
HPR Heavy Pallet Rails. A transport system used to carry pallets up to 15kg in weight
HTC High Throughput Conveyor. A combined manual/programmable width conveyor system which
sets the rail width and transports boards through the printer using belts.
Instinctiv The DEK printer software interface providing to the user an enhanced graphically printer display.
Knead Action of working the solder paste into a soft mixture.
Loom Wiring harness or cable assembly. A loom is composed of several wires fitted with a connector.
Magna-Print Quick fit/release squeegee system. The system addresses the issues associated with maintaining
multiple squeegee blades.
MIU Machine Interface Unit. Allows the printer to communicate with other printers up and down the
line.
MMI Man Machine Interface. A modular system enabling communication between the user and the
printer, utilizing the monitor, keyboard, tricoloured beacon and the two button control system.
MTR Modular Transport Rails. Transport rails designed to accept a variety of tooling and clamping
arrangements.
Module Self contained assembly of mechanical and/or electronic construction.
OTS Over the Top Snugger. System for holding the product over the top until the snugger actuates