192277 - Micron Technical Reference V9 Volume 1.pdf - 第232页
PRINT CARRIAGE MODULE CALIBRATIONS 8.12 Technical Reference Manual Chapter Issue 6, Nov 18
PRINT CARRIAGE MODULE
CALIBRATIONS
Chapter Issue 6, Nov 18 Technical Reference Manual 8.11
CALIBRATIONS
Temperature/
Humidity Sensor
The temperature/humidity sensor (located on I/O node board 3) is calibrated at
manufacture and is not adjustable.
NOTE
I/O node board 3 is located inside the print carriage extrusion and the temper-
ature and humidity are measured at this point. Due to heat sources, movement
and air flow, it must be expected for the temperature and humidity to vary
throughout the machine.
PRINT CARRIAGE MODULE
CALIBRATIONS
8.12 Technical Reference Manual Chapter Issue 6, Nov 18
SQUEEGEE MODULE
OVERVIEW
Chapter Issue 8, May 19 Technical Reference Manual 9.1
CHAPTER 9 SQUEEGEE MODULE
OVERVIEW
Item Description Item Description
1 Squeegee Printhead Mechanism 5 Squeegee Drip Tray
2 Rear Squeegee Stepper Motor 6 Rear Squeegee
3 Front Squeegee 7 Print Carriage
4 Squeegee Drip Tray Mechanism 8 Front Squeegee Stepper Motor
1
2
3
4
5
6
7
8