192277 - Micron Technical Reference V9 Volume 1.pdf - 第50页
SAFETY FEATURES LOCKOUT 2.24 Technical Reference Manual Chapter Issue 15, Nov 18
SAFETY FEATURES
LOCKOUT
Chapter Issue 15, Nov 18 Technical Reference Manual 2.23
Pneumatic
Lockout
WARNING
COMPRESSED AIR. COMPRESSED AIR SHOULD NEVER IMPINGE UPON THE
BODY. PORTS, PIPES, ETC MUST NEVER BE BLOCKED BY HAND. BEFORE
CONNECTING OR DISCONNECTING ANY PNEUMATIC COMPONENTS, ENSURE
THE COMPRESSED AIR SUPPLY HAS BEEN DISSIPATED AND DISCONNECTED
FROM THE MACHINE.
Pneumatic lockout of the printer is achieved by:
1. If the electrical lockout procedure has just been implemented, go to Step 4.
2. Close down the printer software.
3. Switch the electrical mains isolator to the OFF position.
4. Turn OFF the factory’s main pneumatic supply to the printer.
5. Dissipate remaining air in the pneumatic supply line.
6. Disconnect the pneumatic supply line from the printer.
7. This completes the pneumatic lockout.
SAFETY FEATURES
LOCKOUT
2.24 Technical Reference Manual Chapter Issue 15, Nov 18
COVERS
PRINTER COVERS
Chapter Issue 12, Nov 18 Technical Reference Manual 3.1
CHAPTER 3 COVERS
PRINTER COVERS
There are five printer cover designs:
• Type 1
• Type 2
• Type 3
• Type 4
• Type 5