西门子SIPLACE HF-设备参数_US.pdf - 第25页
25 Component Feeding Tape Feeders Technical da ta a) Fiducial for fe eder posit ion detectio n; b) for 0201 and 0402 only ; c) vari able in 4 mm increments . Description Only 9 different feeder sizes are needed to feed t…
24
Component Feeding
Component Changeover Table
Technical Data
Length x width 728 x 592 mm²,
752 x 592 mm² (with waste container)
Height 830 mm for 830 mm PCB transport height
900 mm for 900 mm PCB transport height
930 mm for 930 mm PCB transport height
950 mm for 950 mm PCB transport height
PCB transport height 830 mm ± 15 mm (standard)
900 mm ± 15 mm (SMEMA)
930 mm ± 15 mm (SMEMA)
950 mm ± 15 mm (SMEMA)
Weight
without feeder
with feeders at every location
with compressed air supply for bulk case
feeder and adapter for the 3rd tape reel
approx. 85 kg
approx. 125 kg
approx. 150 kg
Reel diameter
standard
maximum
up to 432 mm (17“)
483 mm (19“)
Feeder locations max. 15
Changeover time less than 1 min.
Component feeder table
Centering
Communication unit
Waste container
for pieces of used tape
Tape container
25
Component Feeding
Tape Feeders
Technical data
a) Fiducial for feeder position detection;
b) for 0201 and 0402 only;
c) variable in 4 mm increments.
Description
Only 9 different feeder sizes
are needed to feed tapes
from 8 mm to 88 mm. Reels
are kept in the tape container
on the component change-
over table. A cutting device
automatically cuts the used
tape. SIPLACE feeders have
short cycle times and high-
precision pick-up positions.
Even multiple products and
small batch sizes are easy to
handle since the feeders can
be quickly changed over.
Packaging Model Loca-
tions
Transport
distance
Max. CO
height
Paper and
blister tapes
2 x 8 mm S
a)
3 x 8 mm S
3 x 8 mm S
b)
12/16 mm S
1
1
1
1
2/4 mm
2/4 mm
2/4 mm
4/16 mm
c)
2.5 mm
2.5 mm
0.7 mm
14 mm
Blister tapes 1 x 24/32 mm S
1 x 24/32 mm S DP
1 x 44 mm S
1 x 44 mm S DP
1 x 56 mm S
1 x 56 mm S DP
1 x 72 mm S
1 x 88 mm S
1.5
1.5
2.0
2.0
2.5
2.5
3
3.5
4/40 mm
c)
4/40 mm
c)
4/52 mm
c)
4/56 mm
c)
4/68 mm
c)
4/68 mm
c)
4/80 mm
c)
4/88 mm
c)
14 mm
24 mm
14 mm
24 mm
14 mm
24 mm
14 mm
14 mm
Tape reels 178 - 483 mm diameter (7" - 19")
Feeder cycle S feeder up to 20 mm transport distance
< 150 ms
Both the tape cycle incre-
ment and the use of tape
materials are variable.
SIPLACE feeders are suitable
for both paper and plastic
tapes. This represents a sig-
nificant benefit in terms of
both cost and logistics. A sig-
nal from the communication
unit enables the feeders to
automatically control the en-
tire feeder sequence, includ-
ing automatic strip take-up.
The S feeders have shorter
cycle times and can process
tapes with a pocket pitch of
2mm (8 mm S).
The 8 mm S and 12/16 mm S
also have a component
cover.
The feeders can also be used
in other SIPLACE placement
machines.
2 x 8 mm S
3 x 8 mm S
3 x 8 mm S 0201
12/16 mm S
24/32 mm S
44 mm S
56 mm S
72 mm S
88 mm S
26
Component Feeding
Bulk Case Feeder
Technical data
a) Fiducial for feeder position detection
Bulk case feeder
a)
Packaging form Bulk case
Feeder rails Chip 0402 CO height: 0.35 mm
Chip 0402 CO height: 0.50 mm
Chip 0603 CO height: 0.45 mm
Chip 0603 CO height: 0.80 mm
Chip 0805 CO height: 0.45 mm
Chip 0805 CO height: 0.60 mm
Chip 0805 CO height: 0.85 mm
Chip 0805 CO height: 1.25 mm
Micro-Melf: 1.05 ± 0.05 mm
Mini-Melf: 1.4 ± 0.1 mm
Location 1 location for 2 different compo-
nent types
Vibratory stick feeder,
type 3
with control circuit
Number of tracks and
width
3 x 9.5 mm
2 x 15 mm
1 x > 15 mm
1 x 30 mm
Location 1 location
Description
The SIPLACE bulk case feeder
processes bulk cases on two
tracks. It feeds rectangular
and round, passive compo-
nents. The PCB magazines
(bulk cases) are simply re-
placed for refilling - without
stopping the machine.
The module essentially con-
sists of the basic element plus
two feeder rails and PCB mag-
azines to suit the component
type and height. The compo-
nents are separated and fed
along the rails by compressed
air.
The principle of the fixed
component pocket has prov-
en most suitable, even when
using bulk cases: the vibra-
tions that occur with other
placement machine concepts
can greatly impair the com-
ponent quality due to fric-
tion, for example.
The stationary component
feeder also has significant
advantages with stick maga-
zines: the universal vibratory
stick feeder can be refilled
during placement.
Bulk case feeder
Vibratory -
stick feeder, type 3