00197500-04_IM_Material_Manager_2.1_EN.pdf - 第18页
Installing the MaterialManager 18 Installation Manual SIPLACE Material ManagerV2.1 Database Settings Database Server Name of the server hosting the Material Manager datab ase. Database Port Number of the por t that shal…
Installing the MaterialManager
Installation Manual SIPLACE Material ManagerV2.1 17
Configuring Material Manager – Common tab
In this tab you set general specifications for the Material Manager.
ConfigurationCommon.xml
Settings for the Application Server
SiMM Application Server
Name of the server on which the Material Manager shall be installed.
Application Server Description
Description for the server defined above. The text will be displayed to the right at the bottom of the Web
pages.
Use Web Services Security
Enable this option if you want to operate a Web service with activated Web security.
This option is disabled by default and should only be enabled for special requirements within the project
environment.
Language
Language in which the GUI and the Material Manager reports shall be displayed. This GUI language can
be changed afterwards in the Material Manager.
If necessary, the language of the reports can be changed afterwards with the ConfigurationHelper (see
chapter "6 Changing the Configuration" [ ➙ 47]).
Installing the MaterialManager
18 Installation Manual SIPLACE Material ManagerV2.1
Database Settings
Database Server
Name of the server hosting the Material Manager database.
Database Port
Number of the port that shall be used to communicate with the host of the Material Manager database.
Material Requirement List
Material requirement list settings for the storage.
Use Royonics Warehouse System
If this option is enabled, the storage management will not be performed by the Material Manager but by
Royonics Warehouse.
Split Material List
If this option is enabled, only one packaging unit per material and lane will be picked in the first run. The
additionally required refill material will be listed on a new material requirement list.
Max Reels per Material
Defines the maximum quantity of packaging units of a material that may be picked. If the quantity is in
-
sufficient, an additional material requirement list will be created. This makes sure that no vast quantity
of material is picked.
Inventory
Setting for the end-of-period inventory.
Inventory result path
Path for the inventory result file. If no path is specified, the file cannot be written. Make sure that the local
user ID "Network service" under which the Application Server runs has write access to this folder.
Browse…
Here you navigate to the folder in which you want to store the inventory result file.
Installing the MaterialManager
Installation Manual SIPLACE Material ManagerV2.1 19
Configuring Material Manager – E-Mail Escalation tab
In this tab you set the e-mail addresses of the recipients to whom the automatically triggered escalation
e-mails will be sent.
Email Configuration – OIB
Settings for escalation e-mails concerning the OIB configuration
Send email when operation fails
If this option is enabled, an escalation e-mail will be sent if the communication with a SIPLACE system
over OIB failed. This may happen, e.g. if messages from the Material Manager to Setup Center cannot
be sent or messages from Setup Center cannot be processed.
The description of the other options can be found below.
Email Configuration – Additional Consumption
Settings for escalation e-mails concerning the additional consumption.
Send email when additional consumption
If this option is enabled, an escalation e-mail will be sent if the additional consumption of a material ex
-
ceeds a certain percentage. The default threshold value is 10%.
The description of the other options can be found below.