00197500-04_IM_Material_Manager_2.1_EN.pdf - 第31页

Installing the MaterialManager Installation Manual SIPLACE Material ManagerV2.1 31 Example: I f M S D le v el 2 is s e t h e re , t h e MS D o p e n t im e s of al l ma t e ri a ls with MSD level 1 and MSD level 2 will …

Installing the MaterialManager

30 Installation Manual SIPLACE Material ManagerV2.1

Configuring Material Manager – Packaging Unit Management

For various reasons, packaging units may be flagged as Locked.

In this tab you can unlock locked packaging units for certain processes.

Should locked Packaging Units be included for process?

Process Create Storage List

If this option is enabled, locked packaging units may be used when storage lists are created.

Process Create Pick List

If this option is enabled, locked packaging units may be used when pick lists are created.

Process Create Restorage List

If this option is enabled, locked packaging units may be used when storage lists returned from the pro

duction are created.

Process Receipt Packaging Unit

If this option is enabled, locked packaging units may be used within the material receipt process.

MSD

MSD Level Threshold

Here you set the global threshold value from which the MSD open time of materials shall not be checked

by the system.

MSD level 1 is preset. If necessary, you may set a lower MSD level.

Installing the MaterialManager

Installation Manual SIPLACE Material ManagerV2.1 31

Example:

If MSD level 2 is set here, the MSD open times of all materials with MSD level 1 and MSD level 2 will be

ignored by the system.

Use this option if you are sure that the processed materials up to the set MSD level ALWAYS will be

completely consumed before the remaining MSD open time expires.

MSD Penalty Time (Minutes)

Here set the number of minutes that will be subtracted from the remaining MSD open time if no MSD

start has been performed after that a packaging unit was picked from a dry storage or an airtight pack

aging was opened.

The "Penalty Time" is entered automatically as soon as the system detects the missing MSD start, e.g.

during setup in the line or storage.

MSD Warning Time (Minutes)

Here set the number of minutes for the remaining MSD open time below which a warning will be dis

played during storage that the package durability will expire soon.

Thereupon, the user can decide if it makes sense to store the packaging unit or not.

Automatic printing of expired material report

If necessary, it is possible to print a list of all expired packaging units automatically. Expired means that

the expiration date of the packaging unit has been exceeded. The entries remain in the list until the pack

aging unit has been manually deleted or the expiration date of the packaging unit has been changed ac

cordingly.

Enable automatic printing

If this option is enabled, the list will be created and printed.

In the options that are displayed now, set time and the printer to be used.

Select at least one day of the week for automatic printing

Enable at least one day of the week on which the list shall be created and printed.

Report time

Set the time at which the list shall be printed.

Use standard printer

Enable this option if the preset default printer shall be used to print the list.

Printerpath

If another printer as the default printer shall be used, enter the path and network name of it here.

Level MSD open time

1 unlimited, default value

2 1 year

2 A 4 weeks

3 168 hours

4 72 hours

5 48 hours

5 A 24 hours

6 6 hours

Installing the MaterialManager

32 Installation Manual SIPLACE Material ManagerV2.1

Configuring Material Manager – Monitor Records tab

In this tab you configure the type of reaction by the Material Manager to certain Setup Center messages.

The Setup Center messages will be classified according to type, stored in the Material Manager data

base as monitor records and then processed according to the settings in this dialog box.

Message Queuing SetupCenter In

Display area for Setup Center messages.

Monitor Operations

In this area, the different Setup Center message types (IDs) and the specific processing behavior are

displayed. Set the appropriate processing behavior for the messages under Action.

ID: Monitor_OIB_MaterialMoved

These messages will be generated if a packaging unit is moved in Setup Center, e.g. during setup.

ID: Monitor_OIB_PackagingConsumed

These messages will be generated if a packaging unit is consumed in Setup Center.

ID: Monitor_OIB_PackagingQuantityChanged

These messages will be generated if the quantity of components has changed within a packaging unit.

ID: Monitor_OIB_SpliceChainSplit

These messages will be generated if a packaging unit chain gets splitted in Setup Center.