00197500-04_IM_Material_Manager_2.1_EN.pdf - 第23页

Installing the MaterialManager Installation Manual SIPLACE Material ManagerV2.1 23 ▪ Small Smaller labels 40 x 74 mm Article numb er and pac kaging unit ID ▪ Big Bigger labels 51 x 76 mm Article numb er, packaging unit …

Installing the MaterialManager

22 Installation Manual SIPLACE Material ManagerV2.1

▪ Default + Supplier

Default incoming area extended by the supplier data.

▪ Default

Default incoming area as before.

▪ Existing

This option corresponds to the previous configuration.

Store username in Packaging Unit

If this option is enabled, the name of the user that enters a packaging unit into the Material Manager will

be stored together with the packaging unit data.

Allow storage location on label

If this option is enabled, the preferred storage location can be printed on the label.

Supplier quantity discrepancy notification

▪ Always

A message will always be displayed if the quantity of components does not match the planned quan

tity.

▪ Exceeding

A message will only be displayed if more components were received as planned.

▪ Ignore

No message.

Label Configuration

Use standard label printer

If this option is enabled, the labels will be sent in Zebra syntax to the printer. This setting should be se

lected if the GT-430GK default label printer is used.

Otherwise, the setting for other label printers will be used. In this case, a detailed agreement is required

between ASM Assembly Systems GmbH & Co. KG and the customer.

Default printerpath

Path and network name of the preset label printer.

Delay time between labels in ms

(for printer-specific templates only)

If the printer is not able to process the print jobs correctly one after another, you can set a delay time (in

milliseconds) between the respective print jobs.

Label format

Here you set the size of the label that will be stuck on the packaging unit.

Available sizes:

▪ Default

Default size

Article number and packaging unit ID

Installing the MaterialManager

Installation Manual SIPLACE Material ManagerV2.1 23

▪ Small

Smaller labels 40 x 74 mm

Article number and packaging unit ID

▪ Big

Bigger labels 51 x 76 mm

Article number, packaging unit ID, delivered quantity and MSD level

▪ Custom

As default size but may be edited in a TXT file.

The TXT file will be stored under:

*\Siplace\SIPLACE Material Manager\WebApplication\ASM\AS\SiMM\config\Labels\Lot.txt

▪ Existing

This option corresponds to the previous configuration.

Installing the MaterialManager

24 Installation Manual SIPLACE Material ManagerV2.1

Configuring Material Manager – Database Maintenance tab

In this tab you configure the handling of consumed packaging units.

Database Maintenance

Delete consumed Packaging Units

If this option is enabled, a consumed packaging unit will be deleted in the database after the time set

under Duration.

Duration (Days)

Number of days after which a consumed packaging unit will be deleted in the database.

Clean up Packaging Unit history

If this option is enabled, the history of a consumed packaging unit will be deleted in the database after

the time set under Duration.

Duration (Days)

Number of days after which the history of a consumed packaging unit will be deleted in the database.

Reorganize Indices

If this option is enabled, the index entries in the database will be reorganized for faster access.