OM-1352-003_w.pdf - 第28页
1-7 Tg1357-ID-SO 0703-003 1.4 Structure and Names Fig.2 Fig.3 1.4 Structure and Names
1-6
Tg1357-ID-SO
[4] Motor
It rotates the drum (rotational disk).
[5] Syringe
It supplies flux.
[6] Needle
It supplies flux on the drum (rotational disk).
[7] Drawer Connector 1
It supplies power to this device and controls the power to the main
machine (GXH Series).
Note
When the tape feeder power unit is used, connect the cable to the
drawer connector 1 on this machine.
[8] Drawer Connector 2
It supplies power to this device and controls the power to the main
machine (GXH Series).
0703-003
1.3 Names and Functions of Each Section
1-7
Tg1357-ID-SO
0703-003
1.4 Structure and Names
Fig.2
Fig.3
1.4 Structure and Names
1-8
Tg1357-ID-SO
0703-003
1.5 Outline of Actions
(1) Flux is deposited on the drum (rotational disk) and the thick film
is flattened evenly by the squeegee whose height is adjusted to the
specified one.
(2) The drum is stopped just before flux dispensing and flux transfer opera
-
tion is performed.
Squeegee
(For Even Flattening of Flux)
Rotational Disk
(Flux
Transfer Position)
Manual Supply Motor
(For
Table Rotation)
(Depth)
Syringe
(Flux is supplied automatically)
Feeder Control PCB
Feeder Base
Drawer
Connector
Pass Line
PCB Positioning Upper Surface
Center of
Machine
(Width)
(Push Out the Flux in the Syringe)
Fig.4
1.5 Outline of Actions