OM-1352-003_w.pdf - 第47页

5-6 Tg1357-ID-SO 0703-003 [Flux Application Linkage (Cmp Rcg. Cmp dip)] Button This button is used when the ﬂux is applied to the component. When the [ST AR T] button on the operation panel is pressed in ten seconds afte…

5-5

Tg1357-ID-SO

0703-003

"Nozzle ID"

Displayed is the nozzle type speciﬁed with the [Test ID] button.

[Nozzle No.] Button

When this button is pressed, the "Select ID >> Nozzle No."

window opens, enabling you to set the nozzle No. to be used for

the recognition test.

Mnl Atch Dir

Displayed is the direction (reverse or same direction) of

component to be attached by hand.

Def Direct :

This indicates that a component will be attached

in the reverse direction in comparison with the

direction of the components supplied from each

feeder.

Same Direct :

This indicates that a component will be attached

in the same direction as that of the components

supplied from each feeder.

[3] Operation Buttons

[Vacuum ON/OFF] Button

This button can the used to trun on or off the vacuum for the

nozzle.

Either the [Vacuum pick-up OFF] or the [Vacuum pick-up ON]

button appears on the left side of the [Vacuum ON/OFF] button

according to the current vacuum condition.

[Move to Pick-up Pos] Button

This button can be used to manually attach a component.

When the [START] button on the operation panel is pressed in

ten seconds after this button is selected, the head on the X/Y

beam selected in [1] moves the center (zero) position and the

nozzle No. speciﬁed in [2] moves (rotates) toward the front side.

[

Pick from Fdr (Auto)] Button

This button can be used to automatically take out a component.

When the [START] button on the operation panel is pressed in

ten seconds after this button, the head on the X/Y beam selected

in [1] moves the feeder No. position speciﬁed in [2] and takes out

a component.

5.2 Component Recognition Test

5-6

Tg1357-ID-SO

0703-003

[Flux Application Linkage (Cmp Rcg. Cmp dip)] Button

This button is used when the ﬂux is applied to the component.

When the [START] button on the operation panel is pressed in

ten seconds after this button, the head on the X/Y beam selected

in [1] moves the component recognition camera position and

implements component recognition test.

[Move to Recog Pos & comp recog (Full Auto)] Button

This button makes is possible for the machine to perform a

series of operations (full automatic operations) that cover all the

operational sequences between the movement to the recognition

position and the implementation of a recognition operation.

When the [START] button on th

e operation panel is pressed in

ten seconds after this button, the head on the X/Y beam selected

in [1] moves the component recognition camera position and

implements component recognition test.

[Move to Recog Pos] Button

When the [START] button on th

e operation panel is pressed in

ten seconds after this button, the head on the X/Y beam selected

in [1] moves the component recognition camera position.

[Recog component]

Button

When pressed, this button opens the "COMPONENT

RECOGNITION (MANUAL)" window that can be used for a

component recognition operation, rotational actions, etc.

[Comp collection] Button

When pressed, this button moves the head on the X/Y beam to

the center (zero) position.

Notice

After the component collection manually, press the

[Vacuum ON/OFF] button to set the vacuum valve to

"OFF".

[Comp Dscd] Button

When pressed, this button activates the component discarding

function according to the library data.

[Move to beam zero] Button

When pressed, this button zeroes the X/Y beam.

[Flux Apply Equip.] Button

Pressing this button displays the "Flux Dispensing Unit" window.

5.2 Component Recognition Test

5-7

Tg1357-ID-SO

0703-003

[4] "Result of Hysteresis Test" Group Box

Displayed are the results of a component recognition test.

[5] [ZERO]

Button

When pressed, this button zeroes all axes on the stage side where the

selected X/Y beam is located. For example, when Beam #1 or #2 is

selected, all axes on Stage #1 are zeroed. Selection of Beam #3 or #4

zeroes all axes Stage #2.

[6] [Save Image] Button

When this button is pressed, the "Save Image" window appears.

This button can also be used to save the test results.

[7] [Noz exchange] Button

When this button is pressed, the "Noz exchange" window appears.

[8] Camera Center

[Head] Button

This button is used to align the center of the camera with that of the

head.

[Comp.] Button

This button is used to align the componenet with the center of the

camera.

5.2 Component Recognition Test