OM-1352-003_w.pdf - 第8页
Safety Precautions Safe-1 Tg1357-ID-SO 0703-003 "Safety Precautions" describes the precautionary items that should be kept to prevent personal injury or property damage beforehand and use this unit safely . Bef…
4
Tg1357-ID-SO
In no event shall UIC be liable for any warranty other than the express one here and
any implied warranties of merchantability or fitness for any particular purpose.
In addition, UIC is not liable for any direct or indirect loss or damages whatsoever,
whether based upon express or implied warranty.
No oral or written information, or advice/suggestion given by Hitachi (its
executives, employees, agencies and all concerned) to the original purchaser or a
third party shall create a warranty or obligation to UIC, regarding the conformity
with the performance of the unit. Formally approved information or advice/
suggestion are excluded.
UIC is not responsible for any damage to the provided application software or loss
of data, arising from any damage to this unit.
About Specification Change
Consult the marketing department or sales agency of Hitachi High-Technologies for
desired changes in the specifications of this unit.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modification made without any prior notice in a written form.
About Disposal of Machine
This machine uses flux.
Be sure to wear protective equipment (gloves, apron, and mask, etc.) during the
disposal work.
For the disposal of the machine, dispose of it in accordance with the disposal
method described in the Material Safety Data Sheet (MSDS) in the Appendix.
This machine must be handled differently from ordinary trash.
(1) About Disposal of Flux
In accordance with the Laws and Acts related to disposal treatment
and cleaning, conclude a contract with an authorized industrial waste
disposal firm for consignment disposal and entrust the firm with the
disposal.
Treat the containers, etc., in the same way as the above. For details, read
carefully and understand the contents of Material Safety Data Sheet
(MSDS).
(2) About Disposal of Machine
Contact the marketing department sale agency of Hitachi High-
Technologies for the detailed information on the disposal method of the
machine.
0703-003
Safety Precautions
Safe-1
Tg1357-ID-SO
0703-003
"Safety Precautions" describes the precautionary items that should be kept to prevent
personal injury or property damage beforehand and use this unit safely.
Before using the unit, please understand the contents of the following safety
precautions.
1. About Safety Precaution Labels
The safety precautions are expressed, using the combinations of safety alert symbols
" " and headwords such as "DANGER", "WARNING", or "CAUTION" according to
the degree of danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols " " are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
A precautionary item identified as "
CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
DANGER
This indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal word is
limited to the most extreme situations.
WARNING
This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Safety Precautions
Safe-2
Tg1357-ID-SO
0703-003
•
Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.