OM-1352-003_w.pdf - 第4页

1 Tg1357-ID-SO Before Use W e are grateful to you for purchasing our ﬂux dispensing unit for the Hitachi direct-drive modular mounters. This instruction manual describes the functions, handling, and operations of the ﬂux…

Before using this manual, please note the following items.

1. The contents of this manual are subject to change for improvement

without prior notice. Please pay attention to the latest information that will

be provided or issued by our company.

2. The copyright of the instruction manual belongs to Hitachi High-Tech

Instruments Co., Ltd.

This manual shall not be copied, in whole or part, without written consent

of the publisher.

3. Our company shall not be held to any liability for any damages suffered

or incurred by the end user, arising from any operations other than those

(including the purposes and methods) described in this instruction manual.

Be sure to handle the machine carefully.

4. This instruction manual neither guarantees any license to industrial

property rights, etc., nor grants any license of such rights.

Tg1357-ID-SO

0703-003

Tg1357-ID-SO

Before Use

We are grateful to you for purchasing our ﬂux dispensing unit for the Hitachi direct-drive

modular mounters.

This instruction manual describes the functions, handling, and operations of the ﬂux

dispensing unit for those who have ﬁnished the basic training of the chip mounter.

Before operating the unit, please read this instruction manual carefully to fully understand

the instructions and precautionary measures for safety purposes.

After reading this instruction manual, be sure to keep it at hand for your quick reference.

0703-003

Tg1357-ID-SO

About the Instruction Manual

First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"

(ﬁrst part of this manual).

Identifying Icons in Manual

Notice

This icon shows an important precautionary or a regulatory item.

Note

This icon shows the descriptions for correct operations of the machine.

Reference

This icon shows the items to be referred to.

Procedure

This icon shows the operation procedures.

0703-003