DeltaTherm_IR_REV_C.pdf - 第39页
DeltaTherm IR Cure Module Revision C / Sept ember 2022 Page 39 of 41 Warranty PVA Warranty Policy 244B243B243B PVA warrants t he enclosed produc t against d efects in material or workmanship on all components for one yea…
DeltaTherm IR Cure Module
Revision C / September 2022
Page 38 of 41
Notes
DeltaTherm IR Cure Module
Revision C / September 2022
Page 39 of 41
Warranty
PVA Warranty Policy
244B243B243BPVA warrants the enclosed product against defects in material or workmanship on all
components for one year from the date of shipment.
245B244B244BThe warranty does not extend to components damaged due to misuse, negligence, or
installation and operation that are not in accordance with the recommended factory
instructions. Unauthorized repair or modification of the enclosed product, and/or the use
of spare parts not directly obtained from PVA (or from factory authorized dealers) will void
all warranties.
246B245B245BAll PVA warranties extend only to the original purchaser. Third party warranty claims will
not be honored at any time.
247B246B246BPrior to returning a product for a warranty claim, a return authorization must be obtained
from PVA’s customer service department. Authorization will be issued either via the
telephone, facsimile, or in writing upon your request.
248B247B247BTo qualify as a valid warranty claim, the defective product must be returned to the factory
during the warranty period. Upon return, PVA will repair (or replace) all components found
to be defective in material or workmanship.
249B248B248B(Retain this for your records)
250B249B249BProduct Information:
251B250B250BPRODUCT:
252B251B251BSERIAL NUMBER:
253B252B252BDATE OF PURCHASE:
DeltaTherm IR Cure Module
Revision C / September 2022
Page 40 of 41
Appendix A – Definitions
254B253B253BAuto Cycle – Machine state where cycles are running. Mutually exclusive with Manual and
Setup.
255B254B254BCycle Stop – Machine state where no action is occurring and the machine is at the standby
position. (“Machine ready for operation”).
256B255B255BDepress – Press and hold for the duration of the operation.
257B256B256BIR – Infrared. Type of radiation emitted by the cure module and used to cure materials.
258B257B257BLight Tower – The light tower consists of three stacked lights, red, amber and green (top
to bottom). It is used to indicate the status of the machine.
259B258B258BManual – Machine state that permits the operator to control all the operations of the
machine. Mutually exclusive with Auto Cycle and Setup.
260B259B259BOIT – Operator Interface Terminal. Screen and/or keys used to control the machine.
261B260B260BPIP – Part-in-place sensor. Designation for the sensors that sense parts. Numbered
incrementally along the process flow.
262B261B261BPress – Press and release.
263B262B262BPLC – Programmable Logic Controller. Type of controller used to program industrial
machinery. See also SLC.
264B263B263BPVA –Precision Valve & Automation, Inc.
265B264B264BSetup – Machine state where the Auto Cycle parameters are determined. Mutually
exclusive with Auto Cycle and Manual.
266B265B265BSLC – Small Logic Controller. Type of controller used to program industrial machinery. See
also PLC.