1_SME_DB_Feeder_User_Guide(Eng_Ver1.4).pdf - 第12页
SM-Series SME DB Tape Feeder User's Manual ii About Safety In order to ensure user safety an d prevent property damage, the items to be obs erved are indicated using safety symbols. Cautions to be exercised for sa…
Preface
i
Preface
Thank you for purchasing our SME tape feeder dedicated for use with SM-Series
machines manufactured by Hanwha Precision Machinery Co., Ltd.. A feeder is a device
that supplies parts to be mounted on a PCB.
Since this machine has a motor, gear drive and power supply, unless a user operates it
properly, he/she may get injured.
The “user” mentioned here includes any individual who performs operation and
maintenance.
Caution [Before operating this machine]
Before operating the tape feeder, please read this manual carefully and understand its
content. People who have not received training on this machine should not handle it.
also provides a training program for operating this machine. For details, please contact
the local agent designated by Hanwha Precision Machinery Co., Ltd.
To assure safety in the operation and maintenance of the machine, it is very important
for the user to know the location of potential safety hazard. Please refer to “Safety
Precaution” for more information.
Do not repair the tape feeder in a manner not mentioned in this manual or modify it
without prior written permission from Hanwha Precision Machinery Co., Ltd..
Hanwha Precision Machinery Co., Ltd. provides a training program for operating this
machine. For details, please contact our SMT Global Training Center and local agent
designated by Hanwha Precision Machinery Co., Ltd.
SM-Series SME DB Tape Feeder User's Manual
ii
About Safety
In order to ensure user safety and prevent property damage, the items to be observed are
indicated using safety symbols.
Cautions to be exercised for safety are described in this manual as follows:
Danger Indicates an imminently hazardous situation which, if
remarks following this symbol are not observed, will result in
death or serious injury. Therefore, instructions must be
followed without fail.
Warning Indicates a potentially hazardous situation which, if remarks
following this symbol are not observed, will result in death or
serious injury. Therefore, instructions must be followed
without fail.
Caution If remarks following this symbol are not observed, damage
to the machine, embedded program, data, etc. may occur,
or accidents involving personal injury may occur. Therefore,
instructions must be followed without fail.
Basic items to be observed in common when using the tape feeder are classified as
follows:
Warning The tape feeder must be repaired and calibrated only by our
CS engineer or a person who has received specialized
training.
Do not operated the tape feeder with wet hands or hands
stained with foreign materials.
Caution Perform maintenance of the tape feeder periodically.
When installing or transporting the tape feeder, exercise
care so that the tape feeder does not drop or collide with the
feeder base, causing damage to the tape feeder.
Preface
iii
Concerning Storage
Basic items to be observed with regard to the storage of the Tape Feeder are as follows
Cautions against tape feeder storage and tape feeder reel replacement
Do not replace or keep reels with tape feeders being stacked.
The components of the tape feeder may be damaged or deformed.
Do not pile feeders up on one another
Do not store the feeders in places where temperature and humidity level are high
Do not keep tape feeders in a place with temperatures higher than 40°C or high
humidity. If the tape feeder becomes rusty or the circuit board has moisture, an error
may occur to the driving module or electronic circuits.
Do not store the feeders in places where temperature and humidity level are high