1_SME_DB_Feeder_User_Guide(Eng_Ver1.4).pdf - 第47页
2-21 Operation of the Feeder 2.5. Removing Waste Vinyl In the case of the SME 8mm/W4P1 tape feeder , if the vinyl box i s filled with a certain amount of waste viny l, the vinyl box door opens automatically a nd waste vi…
2-20
SM-Series SME DB Tape Feeder User's Manual
2.4. Remove the tape feeder
Remove the tape feeder from the feeder base in the following manner:
1) Pull the clamp lever back to unfreeze the fixed tape feeder.
2) Pull the tape feeder back slowly to remove it from the feeder base.
2-21
Operation of the Feeder
2.5. Removing Waste Vinyl
In the case of the SME 8mm/W4P1 tape feeder, if the vinyl box is filled with a certain
amount of waste vinyl, the vinyl box door opens automatically and waste vinyl is
discharged. It is recommended to remove waste vinyl once the door opens. The waste
vinyl can be easily cut off using the vinyl cutter installed beside the vinyl box. After
cutting off the waste vinyl, close the door.
Figure2.19 Removing Waste Vinyl of SME 8mm/W4P1 tape feeder
2-22
SM-Series SME DB Tape Feeder User's Manual
2.6. How to Operate the SME Tape Feeder Switch
Figure2.20 Manual Supply Button (OP Panel)
1: SME 8mm, W4P1: LED / SME 12~88mm: 7Segment
2: Forward Button
3: Home Button
4: Backward Button
5: Pitch Change Button
(a) SME 8mm/W4P1 Tape Feeder (b) SME 12~88mm Tape Feeder