1_SME_DB_Feeder_User_Guide(Eng_Ver1.4).pdf - 第19页
1-1 Overview Chapter1. Overview 1.1. Configuration of feeder 1.1.1. SME W4P1 Tape Feeder Figure1.1 Configuration of SME W4P1 tape feeder No. Name No. Name No. Name 1 T ape Guide 2 Locker 3 X Eccen tric Pin 4 Location Fla…
SM-Series SME DB Tape Feeder User's Manual
viii
About Warranty
The warranty is issued to cover the following machine faults and malfunctions.
However, the contents of the warranty stipulated at the time of purchase take
precedence over the above coverage.
What is
covered by
the warranty
If any part of the machine fails to function properly under
normal usage due to defects in material or workmanship, it will
be repaired by Hanwha Precision Machinery Co., Ltd. at no
charge for either parts or labor.
Time period of
the warranty
The term of this warranty shall expire for any of the following
cases.
Feeding count based on 2mm moving pitch: More than 40
million times
When 27 months have elapsed based on the feeder serial
number.
What is not
covered by
the warranty
Any of the following cases are not covered by this warranty.
Normal wear and tear due to long-term use or faults
arising from normal use (natural fading of coating and
plating, wearing-out of parts, etc.)
Delicate changes do not affect the functional quality of the
product (such as noise of an operating controller, sound of
a rotating motor, etc.)
When a machine failure occurs due to a mistake made by
the customer
Tape Guide
Faults resulting from the following cases are not covered by
this warranty as well.
Natural disasters such as earthquake, typhoon, flood,
lightning strike, etc., or accident, and fire
Reconstruction which is not approved by our company or
agents
Use of parts or lubricating oil which are not designated
Insufficient or faulty maintenance or inspection.
Adjustments performed by persons other than designated
agents
1-1
Overview
Chapter1. Overview
1.1. Configuration of feeder
1.1.1. SME W4P1 Tape Feeder
Figure1.1 Configuration of SME W4P1 tape feeder
No. Name No. Name No. Name
1 Tape Guide 2 Locker 3 X Eccentric Pin
4 Location Flange 5 Installation Guide 6 Clamping Roller
7 Probe Pin 8 Reel Plate 9 Vinyl Cutter
10 Clamp Lever 11 Drain Tensioner 12 Drain Handle
13 Handle 14 Vinyl Box 15 Vinyl Box Door
16 UI Button 17 Reel Lever 18 Reel Brake
19 Reel Hanger 20 PCB Cover 21 Drain Cover
1-2
SM-Series SME DB Tape Feeder User's Manual
1.1.2. SME 8mm Tape Feeder
Figure1.2 Configuration of SME 8mm tape feeder
No. Name No. Name No. Name
1 Tape Guide 2 Locker 3 X Eccentric Pin
4 Location Flange 5 Installation Guide 6 Clamping Roller
7 Probe Pin 8 Reel Plate 9 Vinyl Cutter
10 Clamp Lever 11 Drain Tensioner 12 Drain Handle
13 Handle 14 Vinyl Box 15 Vinyl Box Door
16 UI Button 17 Reel Lever 18 Reel Brake
19 Reel Hanger 20 PCB Cover 21 Drain Cover