1_SME_DB_Feeder_User_Guide(Eng_Ver1.4).pdf - 第26页
在线预览 1_SME_DB_Feeder_User_Guide(Eng_Ver1.4).pdf PDF 文档。
1-7
Overview
1.4. Probe Pin Components
Figure1.6 Probe Pin Layout
Table1.2 Probe Pin Assignment (Non IT)
Table1.3 Probe Pin Assignment (IT)
Pin
No.
Function Use
Pin
No.
Function Use
1 ID0 X 7 Indexing Signal
○
2 ID1 X 8 Clamping Signal
○
3 D24V X 9 Indexing Command
○
4 Communication X 10 F24V
○
5 Communication X 11 F24G
○
6 D24G X
Pin
No.
Function Use
Pin
No.
Function Use
1ID0
○
7 Indexing Signal
○
2ID1
○
8 Clamping Signal
○
3 D24V
○
9 Indexing Command
○
4 Communication
○
10 F24V
○
5 Communication
○
11 F24G
○
6 D24G
○
2-1
Operation of the Feeder
Chapter2. Operation of the Feeder
2.1. Installing the SME 8mm/W4P1 Tape Feeder
Caution Do not pull the tape guide up excessively.
Install the tape in the feeder in the specified order
without fail.
Be sure to use a standard tape such as JIS or EIA for
the feeder.
Use only the right size component reel tape for the
feeder.
If the front part and locker of the tape guide are
deformed, the part pickup rate may be reduced.
Therefore, exercise great care when storing and using
the feeder.
Caution Dismantling the feeder could cause damage or injury. If a
feeder malfunctions, please contact contact our CS
company (STS) or local agent.
2.1.1. Opening Tape Guide
(1)Push aside, (2) open by lifting up the locker of SME 8mm/W4P1 tape feeder.
Figure2.1 Opening the tape guide of the 8mm/W4P1 tape feeder