CP643规格书.pdf - 第7页

2. Machine Data and Operating Environment • Power & Air Requirements Voltage: 200 V AC (± 10 %), three phase Frequency: 50/60 Hz Power consumption: 10 kVA Air pressure: 0.5 MPa (5 kgf/cm 2 ) Air consumption: 46 l/min…

(5) The simple design of the placing heads, each consisting of six nozzles, facilitates

maintenance and expands the number of possible nozzle variations.

(6) Press-in type tape feeders drastically reduce the changeover time. Increased rigidity

of the 13 and 15-inch reel holders and speed control of the device tables minimize

feeder vibration, guaranteeing stable tape feed.

(7) Noise reduction measures and a noise reduction cover on the device table reduce

the noise level at the rear of the machine to 76 dB, thereby improving the working

environment for operators. (Results based on measurements conducted by Fuji.)

(8) The design of the XY-table has been improved in comparison to previous CP-642,

CP-642E models, so that two PCBs of up to 220 mm in length can be loaded and

produced simultaneously (‘double board production’). Optional support for PCBs

between 0.3 mm and 0.5 mm in thickness is also available.

The machine uses the lower surface of the PCB as the placing reference, meaning it

is no longer necessary to adjust the height of back-up pins during changeover. This

leads to a reduction in machine downtime at changeover.

– 3 –

CP-643E/643ME Specifications

Edition 3.0

2. Machine Data and Operating Environment

• Power & Air Requirements

Voltage: 200 V AC (± 10 %), three phase

Frequency: 50/60 Hz

Power consumption: 10 kVA

Air pressure: 0.5 MPa (5 kgf/cm

)

Air consumption: 46 l/min. (ANR)

• Control/Display Panels

CRT and control panels

Language: Japanese or English

Vision system monitor

Rear control panel

• System Components

XY-table, PCB conveyors, part supply tables, nozzles, placing heads, vision system cameras

• Machine Weight

CP-643E 6000 kg

CP-643ME Approx. 5400 kg

With rear cover

CP-643E 6500 kg

CP-643ME Approx. 5830 kg

With fence

CP-643E 6400 kg

CP-643ME Approx. 5760 kg

(The above weights do not include part

feeders.)

• Installation Environment

Temperature: 15° C to 35° C

Humidity: 30% to 80%

Protective features: Class IP22 equivalent

• Machine Color

Body: Ivory

Trim: Reddish brown

Notes: The built-in transformer has primary side taps of 200, 210, 220, 230, 380, 400, 415, 460 and

480 Volts.

A dedicated power source, not shared with other large equipment, should be used in order to

avoid electrical noise, voltage fluctuations, high-frequency distortions, and other related

problems.

IP22: IEC compliant (protection against intrusion by body parts, solid objects and water).

– 4 –

CP-643E/643ME Specifications

Edition 3.0

– 5 –

CP-643E/643ME Specifications

Edition 3.0

3. Machine Specifications

3.1 Performance Specifications

Placing rate 0.09 sec./part under the following conditions

•XY-table travel distance: within 14.8 mm

(within 15.3 mm

including compensation)

•D-axis movement: none

•Fθ-axis rotation angle: within 20°

•Pθ-axis rotation angle: 90° or -90°

•Cam speed: 100%

•180° rotation placement: 0.13 sec.

Placing accuracy ± 0.1 mm (3 σ) in XY-direction

(fiducial mark reference) Rotational errors are translated into XY-coordinates.

Placing reliability 99.99 % (including auto recovery)

Part dimensions 0603 (in. 0201) to 20 x 20 mm (including CSPs)

Part height: maximum 6 mm

Package type 8, 12, 16, 24 and 32 mm tapes

Reel diameter: 180 mm, 330 mm and 380 mm

Maximum feeder number CP-643E: 140 feeders (using 8 mm tape feeders)

CP-643ME: 100 feeders (using 8 mm tape feeders)

Fiducial mark reading time Approximately 0.25 sec./mark

Note: This result presumes a 1.2 mm diameter mark is being

used. The time needed for adjustments due to mark shape

variations, location errors and mark to mark travel is

excluded.

Nozzle indexing time 1 pitch index: 0.09 sec.

2 pitch index: 0.15 sec.

3 pitch index: 0.18 sec.

Warranty period Warranty period for this equipment is 6000 working

hours or 2 years (whichever elapses first).

Warranty period for this software is 2000 working hours

or 1 year (whichever elapses first).

Note: Fuji will bear no responsibility for damage due to acts of

nature (fire, flood, earthquakes, etc.) or incorrect operation.