00193796-08.pdf - 第20页

Installation Manual Station Software Version 505.04 20 of 156 4.1.1.2 Calibrating the touchscreen Select Start Æ Settings Æ Control Panel Æ Elo to go to EloTouchscreen Properties : Fig. 4-2:Elo Touchscreen properties → C…

100%1 / 156
Installation Manual, Station Software Version 505.04 Edition 07/2006
19 of 156
4.1.1.1 Changing the screen settings
→ Select Start Æ Settings Æ Control Panel Æ Display.
→ Click the Settings tab.
→ Make the following settings here:
Fig. 4-1: Screen settings
Installation Manual Station Software Version 505.04
20 of 156
4.1.1.2 Calibrating the touchscreen
Select Start Æ Settings Æ Control Panel Æ Elo to go to EloTouchscreen Properties:
Fig. 4-2:Elo Touchscreen properties
→ Click the Kalibrationsdaten tab.
→ Then click the Kalibrationsdaten button. The following message then appears:
Fig. 4 -3 Selection window for the screen to be calibrated
→ Touch the display you wish to calibrate.
A new screen is displayed on which you can perform a calibration.
→ Repeat this procedure for the second screen (on HS and HF machines).
→ Click the OK button to accept the data.
Installation Manual, Station Software Version 505.04 Edition 07/2006
21 of 156
4.1.2 Definitions
4.1.2.1 Initial installation
The first time the station software is installed on a SIPLACE placement machine is known as the
initial installation.
4.1.2.2 Update
If an initial installation has already been performed and a more recent release version of the
station software is to be loaded, then this procedure is referred to as an update.
The release version is identified by the last two digits of the complete version number.
4.1.2.3 Upgrade
The range of functions of the software is indicated by the three digit number contained within the
complete version number.
Example:
505.01 = The number 505 identifies the software functions
The number 01 is the release version 1.
The installation of a software version with a version number higher than the existing, installed
version is known as an upgrade procedure.
Example:
Changing software from 504.01 to 505.01 = upgrade