00193796-08.pdf - 第32页
Installation Manual Station Software Version 505.04 32 of 156 4.2 Machine files As of software version 504, there are 2 databases. MA-Daten.mdb and MA-Achsen.mdb . Machine-related configuration, measurement and parameter…
Installation Manual, Station Software Version 505.04 Edition 07/2006
31 of 156
4.1.4 Result log
The installation program records a detailed log of which software packages and drivers have been
installed. This information is saved in the file c:\windows\instlog.txt. You can view this file with any
text editor.
The information in the file is not deleted. New information is added at the end of the file.
Caution:
Under no circumstances should you make changes to the file. It contains important information
for the service engineers.
Installation Manual Station Software Version 505.04
32 of 156
4.2 Machine files
As of software version 504, there are 2 databases. MA-Daten.mdb and MA-Achsen.mdb.
Machine-related configuration, measurement and parameter data is stored in *.MA files.
The MA-Daten.mdb database contains all standard data except the standard data for the axes. This
data is stored in the MA-Achsen.mdb database.
Note:
All machine data and the database (see machine data database feature) must be of
revision level 50 (version 505.01). Current machine data must not
be replaced by revisio
n
levels of an earlier version, either completely or partially, e.g. revision level 40 (version
504.01).
Machine files:
Description File
Axis data
Axis option data ACHS_OPT.MA
Axis measurement data ACHS_VER.MA
Other axis-related data MA-Achsen.mdb
Nozzle changer
Measurement positions PPW_VERM.MA
Current nozzle changer allocation PPW_AKT.MA
Current nozzle head allocation AKTUELL.MA
Sensor systems
Sensor system individual data KAMDAT.MA
Measurement data
Measurement positions REAL.MA
Nozzle offsets PIP_OFF.MA
Machine configuration, machine configuration options
Machine configuration KONFIG.MA
Machine options MA_OPT.MA
Other data MA-Daten.mdb
Installation Manual, Station Software Version 505.04 Edition 07/2006
33 of 156
4.3 Installing the machine controller on a CPU076 (HF and HF/3)
4.3.1 BIOS setup
The CPU buffers the current CMOS settings in a flash EPROM. If the CMOS settings are lost, they
will be restored from the flash settings on the next power-up.
Note:
For a detailed description of the BIOS, see the technical description
CPCI-/SMP16-CPU076.
Settings marked in blue, bold and italics have been changed from the default BIOS settings.
4.3.1.1 IDE Primary/Secondary Master/Slave
Auto
The device parameters are automatically determined when the system is
started.
Manual The device parameters can be entered by hand (only in Access Mode CHS).
None
No IDE device has been connected or a connected device is to be ignored.
Auto is set by default.
4.3.1.2 Access Mode
Auto
The device parameters are automatically determined when the system is
started.
LBA Hard disks > 528MB which support Logic Block Addressing mode (LBA).
CHS Hard disks < 528MB
Large Hard disks > 528MB which do not support Logic Block Addressing mode
(LBA).
Auto is set by default.
If Manual and CHS are selected for the device, the disk parameters can be entered.
Cylinder
Number of cylinders
Head Number of read/write heads
Precomp Write precompensation
Landing Zone Landing zone
Sector Number of sectors / cylinders