00193796-08.pdf - 第64页

Installation Manual, Station Software Version 505.04 Edition 07/2006

63 of 156

4.4.1.6 Setup page "Floppy Disk"

┌───────────────┤ Floppy Disk ├────────────────┐

│ Drive A: Drive B: │

│ ┌─────────────┐ ┌─────────────┐ │

│ │ ( ) NONE │ │ (*) NONE │ ╔══════╗ │

│ │ ( ) 360 Kb │ │ ( ) 360 Kb │ ║ OK ║ │

│ │ ( ) 1.2 Mb │ │ ( ) 1.2 Mb │ ╚══════╝ │

│ │ ( ) 720 Kb │ │ ( ) 720 Kb │ ┌──────┐ │

│ │ (*) 1.44 Mb │ │ ( ) 1.44 Mb │ │Cancel│ │

│ │ ( ) 2.88 Mb │ │ ( ) 2.88 Mb │ └──────┘ │

│ └─────────────┘ └─────────────┘ │

│ ┌───────────────────────────────┐ │

│ │ [√] Test Floppy Disks │ │

│ └───────────────────────────────┘ │

│ Press [F1] key for help │

└──────────────────────────────────────────────┘

Setup page for setting the floppy drive types:

Drive A: Set the format of floppy drive A:

Drive B: Set the format of floppy drive B:

Test Floppy

Disks

If this option is activated, the BIOS chacks whether the format which has

been set in the parameters is supported by the connected drive. If not, an

error message is issued during booting (if this option has been

activated).

4.4.1.7 Setup page "Boot Features"

┌──────────────────────┤ Boot Features ├───────────────────────┐

│ │

│ ╔══════╗ ┌──────┐ ┌───────┐ │

│ Press [F1] key for help ║ OK ║ │Cancel│ │Default│ │

│ ╚══════╝ └──────┘ └───────┘ │

│ ┌─Boot Sequence─────────┐ ┌─Keyboard State─────────────────┐ │

│ │ │ │ [ ] Typematic Settings Enabled │ │

│ │ (*) A:, C: │ │ Typematic Rate: 6 (char/s) │ │

│ │ ( ) C:, A: │ │ Typematic Delay: 250 (msec) │ │

│ │ │ │ [√] Num Lock On │ │

│ └───────────────────────┘ └────────────────────────────────┘ │

│ ┌─Halt On Errors────────┐ ┌─System Memory──────────────────┐ │

│ │ [√] Halt on Errors │ │ │ │

│ │ Except for ... │ │ [ ] Quick Memory Test │ │

│ │ [ ] Keyboard Errors │ │ │ │

│ │ [ ] Disk Errors │ │ │ │

│ └───────────────────────┘ └────────────────────────────────┘ │

│ Press [F1] key for help │

└──────────────────────────────────────────────────────────────┘

Installation Manual Station Software Version 505.04

64 of 156

Boot Sequence Set the boot media sequence:

A:, C:

The system first attempts to boot from drive A:, then from drive C:

Typematic Sets the keyboard reaction time.

Num Lock On This option sets whether the BIOS sets the Num Lock feature on the

keyboard on or off prior to booting.

Halt on Errors If this option is activated, BIOS will stop during the start-up process in the

event of an error and will display an error message. If this option is not

activated, the BIOS continues without an error message and uses the

default values for processing. If the option is activated, the following

causes of errors can additionally be ruled out:

Keyboard Errors Keyboard errors do not generate an error message.

Disk Errors Floppy and hard disk errors do not generate an error

message.

Quick Memory-

Test

Caution: Due to hardware synchronization, this option must

not be activated

.

4.4.1.8 Setup page "Standard Chipset"

┌────────────────────┤ Standard Chipset ├─────────────────────┐

│ │

│ ╔══════╗ ┌──────┐ ┌───────┐ │

│ ║ OK ║ │Cancel│ │Default│ │

│ ┌─System Cache─────────────┐ ╚══════╝ └──────┘ └───────┘ │

│ │ ( ) Disabled │ │

│ │ ( ) Primary Only │ ┌─Secondary Cache Size───────┐ │

│ │ (*) Primary and Secondary│ │ 256 KB Pipelined Burst │ │

│ └──────────────────────────┘ └────────────────────────────┘ │

│ ┌─Shadow and Cache Options────────────────────────────────┐ │

│ │ Shadow Cache Shadow Cache │ │

│ │ System ROM: [√] Video ROM: [√] [√] │ │

│ │ C800-CBFF: [ ] [ ] CC00-CFFF: [ ] [ ] │ │

│ │ D000-D3FF: [ ] [ ] D400-D7FF: [ ] [ ] │ │

│ │ D800-DBFF: [ ] [ ] DC00-DFFF: [ ] [ ] │ │

│ └─────────────────────────────────────────────────────────┘ │

│ Press [F1] key for help │

└─────────────────────────────────────────────────────────────┘

This page is used to make the standard chipset settings.

System Cache

You can specify the use of the processor cache.

Primary and

Secondary

The internal processor cache and the external cache are used.

Installation Manual, Station Software Version 505.04 Edition 07/2006

65 of 156

Secondary Cache Size

The size of the secondary cache detected by the BIOS is displayed.

Shadow and Cache Options

Sets shadow and cache options for various memory areas.

This setting is only relevant for ISA adapters, as PCI adapters are always shadowed and cached.

The Cache option can only be activated if the Shadow option has been activated.

Shadow The relevant memory area (generally an option ROM in an ISA adapter)

is copied to DRAM for faster processing.

Cache The area is also cached.

4.4.1.9 Setup page "Advanced Chipset"

┌───────────────────────────┤ Advanced Chipset ├────────────────────────────┐

│┌─DRAM Timing───────────────────────┐┌─DRAM Error────────┐┌──────────────┐ │

││ ││ ││ ╔══════╗ │ │

││ DRAM Speed: (*) 60 ns ││ ││ ║ OK ║ │ │

││ ( ) 70 ns ││ (*) None ││ ╚══════╝ │ │

││ ( ) User defined ││ ( ) Parity ││ ┌──────┐ │ │

││ ││ ( ) ECC ││ │Cancel│ │ │

││ DRAM Read Burst: x222/x333 ││ ││ └──────┘ │ │

││ DRAM Write Burst: x222 ││ (*) Multiple ││ │ │

││ Fast RAS to CAS Delay: 3 Clocks ││ ( ) Single ││ ┌───────┐ │ │

││ Leadoff: 6 Cl-Rd, 5 Cl-Wr, 3 BAS ││ ││ │Default│ │ │

││ ││ ││ └───────┘ │ │

│└───────────────────────────────────┘└───────────────────┘└──────────────┘ │

│┌─I/O Recovery Times────────────────┐┌─Miscellaneous─────────────────────┐ │

││ ││ │ │

││ 8 Bit Cycles: +1 Clock ││ [√] Enable Memory Hole at 15-16MB │ │

││ 16 Bit Cycles: +1 Clock ││ │ │

││ ││ │ │

│└───────────────────────────────────┘└───────────────────────────────────┘ │

│ Press [F1] key for help │

└───────────────────────────────────────────────────────────────────────────┘

This page is used to make advanced chipset settings.

DRAM Timing

Sets the DRAM timing.

The DRAM timing is set optimally by the BIOS and will generally not need to be changed.

I/O Recovery Times

Sets the I/O recovery times in ISA bus clocks for 8-bit I/O and 16-bit I/O

DRAM Error

Sets the DRAM error handling method in the BIOS for DIMMs with a parity bit.