00193796-08.pdf - 第67页
Installation Manual, Station Software Version 505.04 Edition 07/2006 67 of 156 Secondary IDE: Disabled DIE channel disabled Floppy Disks: Enabled Floppy controller enabled It is also possible to assign the drive letters:…
Installation Manual Station Software Version 505.04
66 of 156
The chipset suppurts automatic detection and correction of DRAM bit errors using ECC as well as
normal parity handling. This setting is only effective if DIMMs with a parity bit are used.
None No error handling. Bit errors are not detected.
Miscellaneous
Enable Memory
Hole at 15-16MB
Address window for SIPLACE GEM option
4.4.1.10 Setup page "Peripherals"
┌────────────────────────┤ Peripherals ├────────────────────────┐
│ │
│ ┌─Serial / Parallel Ports───────────────────────┐ │
│ │ Serial Port A: 3F8h, IRQ4 │ ╔══════╗ │
│ │ Serial Port B: 2F8h, IRQ3 │ ║ OK ║ │
│ │ Parallel Port: 378h, IRQ7 Bidirectional │ ╚══════╝ │
│ └───────────────────────────────────────────────┘ │
│ ┌─IDE / Floppy Controller───────────────────────┐ ┌──────┐ │
│ │ Primary IDE: Enabled │ │Cancel│ │
│ │ Secondary IDE: Disabled │ └──────┘ │
│ │ Floppy Disks: Enabled Normal │ │
│ └───────────────────────────────────────────────┘ ┌───────┐ │
│ ┌─Miscellaneous─────────────────────────────────┐ │Default│ │
│ │ PS/2 Mouse: Disabled │ └───────┘ │
│ └───────────────────────────────────────────────┘ │
│ Press [F1] key for help │
└───────────────────────────────────────────────────────────────┘
This setup page allows you to make settings for the peripherals.
Serial / Parallel Ports
Serial Port A: Sets the I/O addresses and IRQs of serial port A:
3F8h, IRQ4
Serial Port B: Sets the I/O addresses and IRQs of serial port B:
2F8h, IRQ3
Parallel Port: Sets the I/O addresses, IRQs and mode of the parallel port:
378h, IRQ7
Bidirectional
Port can be used for input and output
IDE/Floppy Controller
Primary IDE:
Enabled
DIE channel enabled
Installation Manual, Station Software Version 505.04 Edition 07/2006
67 of 156
Secondary IDE:
Disabled
DIE channel disabled
Floppy Disks:
Enabled
Floppy controller enabled
It is also possible to assign the drive letters:
Normal Normal operation
Miscellaneous
PS/2 Mouse:
Disabled
PS/2 mouse deactivated
4.4.1.11 Setup page "PCI Setup"
┌────────────────┤ PCI Setup ├───────────────┐
│ ┌──────────────────────────┐ │
│ │ MultiMedia Enable: [ ] │ ╔══════╗ │
│ └──────────────────────────┘ ║ OK ║ │
│ ┌──────────────────────────┐ ╚══════╝ │
│ │ PCI INT IRQ │ ┌──────┐ │
│ │ A: 7 │ │Cancel│ │
│ │ B: NONE │ └──────┘ │
│ │ C: NONE │ ┌───────┐ │
│ │ D: NONE │ │Default│ │
│ └──────────────────────────┘ └───────┘ │
│ Press [F1] key for help │
└────────────────────────────────────────────┘
This page is used to make specific PCI settings.
MultiMedia Enable:
This option activates "video palette snooping". This may be required if an ISA video adapter and a
PCI video overlay adapter are installed and incorrect colors are displayed.
PCI-Interrupt-Routing
For each PCI INT (= motherboard INT) an IRQ can now be defined in the setup fields.
Since the LAN card of the M54 is designed as a PCI card, PCI INT A is required.
In Setup, IRQ 7 is to be entered for PCI INT A. During start-up, the BIOS will then assign this IRQ to
the PCI card.
Installation Manual Station Software Version 505.04
68 of 156
4.4.1.12 Setup page "IMC Interrupts"
┌─────────────────────┤ IMC Interrupts ├────────────────────────┐
│ │
│ ┌───────────────────────────────────────────────┐ ╔══════╗ │
│ │ PC-IRQ IRQ-Source IRQ-Mode │ ║ OK ║ │
│ │ 3 onboard COM transparent │ ╚══════╝ │
│ │ 4 onboard COM transparent │ ┌──────┐ │
│ │ 5 SMP_INT2 transparent │ │CANCEL│ │
│ │ 6 onboard Floppy transparent │ └──────┘ │
│ │ 7 not assigned transparent │ ┌───────┐ │
│ │ 10 SMP_INT5 transparent │ │Default│ │
│ │ 11 SMP_INT6 transparent │ └───────┘ │
│ │ 14 onboard IDE transparent │ │
│ └───────────────────────────────────────────────┘ │
│ │
│ │
│ Press [F1] key for help │
└───────────────────────────────────────────────────────────────┘
The electronic interrupt matrix is to be set up as follows on this page.
PC-IRQ IRQ-Source
3 through 14 Unassigned
3
Onboard COM
4
Onboard COM
5 SMP_INT2 SMP16 interrupt c19
6 Onboard Floppy Floppy interrupt
7
Not assigned
10 SMP_INT5 SMP16 interrupt c25
11 SMP_INT6 SMP16 interrupt c27
14 Onboard HD Hard disk interrupt
IRQ-Mode
Transparent Interrupt line is connected through to the interrupt source (default)