00195346-0302_SM_WPC4_EN.pdf - 第92页

SITEST for WPC4 SITEST Axes Positioning Data 92 Ser vice Manual SIPLACE WPC4 5.7.6 Positioning Dat a  Speed [0.01 m/s]: Sh ows the current speed of the selected axis.  Acceleration [0.1 m/s²]: Shows the current acceler…

SITEST for WPC4

Standard Values SITEST Axes

Service Manual SIPLACE WPC4

5.7.5 Standard Values

 Default speed [0.01 m/s]: Shows the maximum speed of the selected axis.

 Default acceleration [0.1 m/s²]: Shows the maximum acceleration with which the feed axis moves

out of the tower.

 Default removal speed [0.01 m/s]:Shows the maximum acceleration with which the feed axis

moves into the tower.

 OK : Closes the dialog box.

NOTE:

The following parameters are for information purposes only and can not be edited.

SITEST for WPC4

SITEST Axes Positioning Data

92 Service Manual SIPLACE WPC4

5.7.6 Positioning Data

 Speed [0.01 m/s]: Shows the current speed of the selected axis.

 Acceleration [0.1 m/s²]: Shows the current acceleration of the selected axis.

 Accept: Confirms the entry and closes the dialog box.

 Cancel: Closes the dialog box and rejects any changes made.

 Edit...: Opens a dialog box in which you can enter the required speed and acceleration.

Setting values

X Mark the parameter which you want to change.

X Select

Edit..

SITEST for WPC4

Positioning Data SITEST Axes

Service Manual SIPLACE WPC4

X Enter the required value in the input field. Make sure the value entered is within the permissible limits.

X Select

to confirm your entry or

Cancel

to reject the entry.

ATTENTION:

WPC machine data is saved directly in the WPC when a change is made.

Back up the current status, so that is can be restored.