YG200_YG200L_Mainte_E.pdf - 第10页
vi Before using the machine Pinch or crush hazard 23 0 0 1 - G 0 -2 J w W ARNING NEVER PLACE HANDS IN THE MACHINE DURING OPERA TION. HAND OR FINGERS MIGHT BE CAUGHT BETWEEN MOVING P AR TS AND COVERS, CAUSING SERIOUS INJU…
v
Before using the machine
1.3
Warning labels
The following warning labels are affixed to the machines. Check the information on the label and always
follow its instructions. This section explains the warning labels affixed to YAMAHA surface mounters and all
other related machines including dispensers, solder paste printers and peripheral equipment.
Risk of injury
Safety cover
23001-G0-2A
w
WARNING
KEEP THE SAFETY COVER CLOSED DURING MACHINE OPERATION. INJURIES MIGHT OCCUR FROM TOUCHING MOVING
PARTS DURING OPERATION WHILE THE SAFETY COVER IS STILL OPEN.
WARNING
DO NOT TOUCH THIS SWITCH
MOVING MACHINE MAY CAUSE INJURY
Possible injury
Safety cover switch
23001-G0-1B
Risk of injury
Safety cover switch
23001-G0-2Q
w
WARNING
DO NOT TAMPER WITH THE SAFETY COVER SWITCH.
INJURIES MIGHT OCCUR FROM TOUCHING MOVING PARTS DURING OPERATION IF THIS SWITCH IS DEACTIVATED.
vi
Before using the machine
Pinch or crush hazard
23001-G0-2J
w
WARNING
NEVER PLACE HANDS IN THE MACHINE DURING OPERATION. HAND OR FINGERS MIGHT BE CAUGHT BETWEEN MOVING
PARTS AND COVERS, CAUSING SERIOUS INJURIES.
Entanglement or cut hazard
WARNING
Gears and cutters can cause
severe personal injury.
Turn power off before
servicing or cleaning.
23001-G0-1M
w
WARNING
DO NOT PUT YOUR HANDS INTO THE MACHINE WHILE THE POWER IS TURNED ON. HAND OR FINGERS MIGHT BE CAUGHT IN
GEARS OR CUT BY CUTTER BLADES, CAUSING INJURIES.
Pinch or crush hazard
23001-G0-1P
w
WARNING
NEVER PLACE HANDS IN THE MACHINE DURING MANUAL OPERATION. HAND OR FINGERS MIGHT BE CAUGHT BETWEEN
MOVING UNITS, CAUSING SERIOUS INJURIES.
Fire hazard
23001-G0-2N
w
WARNING
KEEP AWAY FROM FIRE. SOLVENT MIGHT CATCH FIRE.
vii
Before using the machine
Risk of injury
23001-G0-0S
w
WARNING
THE PERSON EXCHANGING THE FEEDERS MUST HAVE BEEN TRAINED TO OPERATE THE MACHINE CORRECTLY AND SAFELY.
HIGH VOLTAGE!
Electrical shock hazard
23001-G0-1C
c
CAUTION
Use caution since electrical shocks might occur from touching or coming in contact with the power supply section
inside the panel.
HOT!
Possible burns if touched
23001-G0-1D
c
CAUTION
The motor becomes extremely hot during and shortly after operation, so do not touch it!