YG200_YG200L_Mainte_E.pdf - 第61页
3-21 3 Periodic maintenance items n Cl e a n i n g t h e a i r f i l t e r 1 R e m ov e t h e f i l t e r c u p . S e e t h e p r e v i o u s p r o c e d u r e i n " C l e a n i n g t h e f i l t e r c u p " . …
3-20
3
Periodic maintenance items
2.4 Inspecting and cleaning the air/mist filters
Air/mist filters are used to prevent oil, mist and other impurities in the air compressor from penetrating into the
machine. These filters should be inspected and cleaned periodically as instructed below. (The filter closer to
the air coupler is the air filter and the other one is the mist filter.)
n
Cleaning the filter cup
1
Check the inside of the filer cup.
Check for oil or water deposits in the filter
cup through the window. If the window is
dirty, follow the steps below to clean the
filter cup.
Reference
The drain cock at the bottom of the filter cup is an
auto-drain type. It automatically drains the oil or water
when deposited in the cup. We recommend
connecting a hose to this drain cock.
2
Disconnect the air hose from the
air coupler.
c
CAUTION
When disconnecting the air hose, be careful not to
allow oil, water or impurities to splash outwards.
3
Remove the filter cup.
While pressing the red button on the side of
the filter cup, turn it fully towards "IN", and
pull the filter cup downwards.
53330-F8-10
c
CAUTION
Be careful not to lose the air leak-proof O-ring placed
between the filter cup and the top filter body.
4
Clean the inside of the filter cup.
1. Lightly clean the filter cup with water.
2. Then, pour water-diluted neutral
detergent into the filter cup and clean
the inside while shaking it.
3. Air blow the filter cup and wipe away
any moisture with clean cloth or paper.
53331-F8-00
5
Reattach the filter cup.
1. Place the air leak proof O-ring on the
cup. Align the red button on the side of
the cup with the "N" position and push
the cup upwards while being careful to
avoid pinching the O-ring.
2. Turn the cup towards "LOCK" until you
hear a click.
n
NOTE
Leave the filter cup removed to clean the air filter as
explained in the next procedure.
6
Reconnect the air hose to the air
coupler.
After connecting the air hose, check that no
air is leaking.
Cleaning the filter cup
Step 4
Filter cup
Water-diluted neutral
detergent
Removing the filter cup
Step 3
Filter cup
Red button
Air filter body
3-21
3
Periodic maintenance items
n
Cleaning the air filter
1
Remove the filter cup.
See the previous procedure in "Cleaning the
filter cup".
2
Remove the air filter.
Rotate the white disk clockwise as viewed
from the top and take out the air filter.
53332-F8-00
3
Clean the air filter.
Use an air blow gun to blow away dust and
impurities trapped by the air filter. If the filter
is excessively dirty and cannot be cleaned,
replace it with a new filter.
4
Reattach the air filter.
Screw the white disk back in to attach the
air filter to the original position.
53333-F8-00
5
Reattach the filter cup.
n
NOTE
When cleaning the mist filter, use the same procedure.
Removing the air filter
Step 2
Rotate the white disk clockwise
to loosen and remove it.
Reattaching the air filter
Step 4
Air filter
3-22
3
Periodic maintenance items
2.5 Cleaning the camera lens
The camera lens may become dirty sue to dust and dirt, we recommend periodic cleaning as explained below.
1
e
Press the emergency stop button.
The machine must be in emergency stop to
ensure safety during work.
2
Clean the camera lens.
Illuminate the camera from the top with a
pen light or flashlight. You will see the
camera lens.
1. Use a blow brush to blow air onto the
lens to remove dust buildups.
2. Apply several drops of lens cleaner to a
cotton swab and wipe off the lens.
53334-F8-00
Cleaning the lens
Step 2
Camera lens
Cotton swab stick applied
with lens cleaner liquid