YG200_YG200L_Mainte_E.pdf - 第13页

ix Before using the machine Do not use any solvent other than specified 23 0 0 1 - G 0 -2 L c CAUTION Using other than the specified solvents might damage the machine or create a fire hazard. Pull out the cleaning unit bef…

100%1 / 87
viii
Before using the machine
LASER BEAM
Do not stare into laser beam!
Max. output:1 mW, Pulse width: 1ms max.
Semiconductor laser (wavelength: 685nm)
Class 2 laser product
LASER BEAM EXIT
Possible loss of eyesight
23001-G0-1E
c
CAUTION
Looking directly into the laser beam may cause loss of eyesight.
DON'T
TOUCH
Do not touch camera unit
DO NOT TOUCH
23001-G0-1F
c
CAUTION
Do not touch the camera unit or apply impacts since this will adversely affect component mounting operation.
Make correct connections
23001-G0-1K
c
CAUTION
Wrong connections or wiring methods other than specified might damage the machine. Always make correct
connections by using specified wiring methods.
ix
Before using the machine
Do not use any solvent other than specified
23001-G0-2L
c
CAUTION
Using other than the specified solvents might damage the machine or create a fire hazard.
Pull out the cleaning unit before opening/closing the cover having the following label
23001-G0-3R
c
CAUTION
Before opening or closing the cover affixed with this label, pull out the cleaning unit to avoid possible damage.
Close cover before operating FDD or USB memory drive
23001-G0-0T
c
CAUTION
Before operating the FDD or USB memory drive to copy data, always close the media access cover to prevent dust
from adhering to the FDD or USB port and to protect the floppy disk or USB memory device from electrostatic noise.
x
Before using the machine
1.4 Warning label positions
Warning labels with information needed to use the machine safely and correctly are affixed to the machine and
peripheral equipment. Be sure to comply with the instructions on these warning labels.
Warning labels
YG200 attachment positions (1)
WARNING
CLOSE COVER WHILE OPERATING
N Safety cover
WARNING
DO NOT TOUCH THIS SWITCH
MOVING MACHINE MAY CAUSE INJURY
N Above interlock switch (inside safety cover)
N Front lower panel
N
Signal cable connector
N Signal cable connector
(behind panel)
23000-F8-00