YG200_YG200L_Mainte_E.pdf - 第30页
1-10 1 Maintenance 2 . 3 R e q u i r e d t o o l s P r e p a r e t h e f o l l o w i n g t o o l s a n d i t e m s n e c e s s a r y f o r m a i n t e n a n c e . n T o o l l i s t : S u p p l i e d w i t h m a c h i n e…
1-9
1
Maintenance
Oil filling and greasing tools
Optional parts
Grease gun
Grease gun nozzle
(flexible type)
Grease gun nozzle
(bent type)
53106-F8-00
n
Oil filling and greasing tools
Optional parts
Product Name
Parts List Designation
Parts No.
Note
Grease gun
GREASE GUN
K48-M3852-00X
PH-100
Grease gun nozzle
GREASE NOZZLE K48-M3857-00X
Flexible type
Grease gun nozzle
GREASE NOZZLE
K48-M3854-00X Bent (30
°
) type
1-10
1
Maintenance
2.3 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine,
: Options
Name
Description
Phillips screwdriver
Large, small
Slotted (flat-blade) screwdriver
Large, small
Phillips precision screwdriver
#0, #1 (Used to replace nozzle leaf springs and air valves.)
Hex wrench set
1 set
Tweezers
Used to replace ejector filters.
Nozzle holder lubricating syringe
Used to supply turbine oil (VG32).
Grease gun
Used to supply grease (K48-M3852-00X)
Air blow gun
Used for cleaning (KU4-M8590-00X)
Ultrasonic cleaner
Used to clean nozzles.
Needle assembly
Used to clean nozzle holes (KV8-M8883-A0X)
E-ring remover
Used when cleaning FNC lock pin (KV8-M88E3-00X)
E-ring inserter
Used when cleaning FNC lock pin (KV8-M88E1-00X)
Vacuum pencil Used when cleaning FNC lock pin (KV8-M88E4-A0X)
Custom wire
Used when cleaning FNC lock pin (KV8-M88E2-00X)
E-ring Used when cleaning FNC lock pin (KV8-M71RD-00X)
n
Other tool list
: Supplied with machine,
: Options
Name
Description
Grease (lithium-based grease: NSL)
Used to lubricate X and Y axes.
Turbine oil (VG32)
Used to lubricate nozzle holders and nozzles.
Cleaning wipes
Use lint-free cloth or wipes.
Cleaning alcohol Use IPA (isopropyl alcohol) or ethanol.
Paper cup or tray Used for cleaning spline shaft.
Film container or equivalent Used for cleaning nozzle holders.
Marker pen Used for marking when replacing conveyor belt.
Cotton swab stick
Used to clean half mirror and lighting unit.
Lens cleaner Used to clean the lens of multi-vision camera.
Lens blow brush Used to clean the camera lighting unit.
Cleaning tool kit Used for cleaning spline shaft.
Spanner 1 (TS-01)
1-11
1
Maintenance
n
Safety goggles and mask
Name
Description
Dust-proof goggles
Always wear these goggles and mask when using an air blow gun or IPA.
Dust-proof mask