00194932-20 User Manual CAN Test Box-Error Frame Diagnostic unit_en.pdf - 第43页
1 - 43 Edition 10/2 018 SIPLACE CAN Bus 43 4.4 Overview of CAN Bus structures for HF and HF/3 HF HF/3 Universal cable harness Old cable harness COM KSP354 COM KSP 352 COM KSP 352 COM KSP354 SW 504 One CAN bus per machine…
1 - 42
SIPLACE CAN Bus Edition 10/2018
42
Comments:
1 - 43
Edition 10/2018 SIPLACE CAN Bus
43
4.4 Overview of CAN Bus structures for HF and HF/3
HF
HF/3
Universal cable harnessOld cable harness
COM KSP354COM KSP 352
COM KSP 352 COM KSP354
SW 504 One
CAN bus per
machine
SW 505 One
CAN bus per
placement area
Version 01 Version 02
SW 504 One
CAN bus per
machine (was
not available)
SW 505 One
CAN bus per
placement area
COM KSP354COM KSP 352
SW 504 One
CAN bus per
machine
SW 505 One CAN
bus per placement
area (was not
available)
SW 505 One
CAN bus per
placement area
SW 504 One
CAN bus per
machine
Universal cable harnes
Version 02Version 01
Version 01 Version 02
1 - 44
SIPLACE CAN Bus Edition 10/2018
44
4.5 CAN Bus structure for HF
4.5.1 General Differences
The HF machines will have the following differences:
– Communication assemblies 2x KSP 352 or one KSP 354
– HF machines with one CAN Bus for both placement areas are only supported by station soft-
ware versions 504.xx
– HF machines from station software version 505.xx only support the CAN Bus structure with
one CAN Bus per placement area.
– A difference is made between old and (new) universal cable harnesses.
This has the following consequences: 4
When checking or replacing the communication assemblies, always observe the terminating re-
sistors. Make sure you perform a physical check!
Fig. 4.5 - 1 KSP 352 and KSP 354 communication assemblies