00194932-20 User Manual CAN Test Box-Error Frame Diagnostic unit_en.pdf - 第7页
1 - 7 Edition 10/2 018 SIPLACE CAN Bus 7 1 Safety instructions WA R N I N G : Comply with the higher ranking "Safety Instructions " in Chapter "Operational Safety" in the User Manual and Service Manua…
1 - 6
Contents Edition 10/2018
6
4.17 CAN Bus structure SIPLACE E-Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
4.17.1 Machine CAN Bus Structure E-Serie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
4.17.2 Gantry CAN Bus Structure E-Serie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
4.18 CAN Bus structure SIPLACE TX-Series (from Nov.2015). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
4.18.1 Machine CAN Bus Structure TX2i and TX2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
4.18.2 Gantry CAN Bus TX2i and TX2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
4.18.3 Machine CAN Bus Structure TX1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
4.18.4 Gantry CAN Bus TX1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
4.19 CAN Bus structure SIPLACE TX-Series with TXmicron (from MA No. TA500 January 2017) 159
4.19.1 Machine CAN Bus Structure TX2i, TX2 and TXmicron (from MA No. TA 500 January 2017)
160
4.19.2 Machine CAN Bus Structure TX1 (from MA No. TA 500 January 2015) . . . . . . . . . 162
4.20 CAN Bus structure SIPLACE TX-Series Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
4.20.1 Machine CAN Bus Structure TX2i, TX2 Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . 165
4.20.2 Gantry CAN Bus TX2i/2 Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
4.20.3 Machine CAN Bus Structure TX1 Version 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
4.20.4 Gantry CAN Bus TX1 Version 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
1 - 7
Edition 10/2018 SIPLACE CAN Bus
7
1 Safety instructions
WARNING:
Comply with the higher ranking "Safety Instructions" in Chapter "Operational Safety" in the User
Manual and Service Manual.
The placement machines SIPLACE are powered by mains voltage.
Portions of the system are therefore conducting dangerous electricity, inside the machine even
while the master switch is turned off.
Death, serious injury or considerable damage may result if these automatic placement systems
are handled incorrectly.
After you have properly carried out the shut-down of the operating system:
Before all work the machine must be turned off at the main switch and isolated from the mains. In
addition, the compressed air supply must be turned off at the main valve of the compressed air
unit in the machine base.
Danger:
For anyone wearing a heart pacemaker it is not permitted to work near linear motors, as described
in detail in the User Manual and the Service Manual, Chapter "Special Safety Instructions when
working in vivinty of powerful magnetic fields" .
Obey the applicable accident prevention regulations, DIN standards and special safety codes of
your country at all times. DIN EN 60204 must be adhered to during all work inside the machine
base.
Follow the instructions regarding residual voltages in Chapter "Operational Safety".
Comply with regulations on ESDs (see Chapter "Operational Safety").
During the work of service secure the machine conscientiously against other personnel and pre-
vent it from being turned back on without authorization, as described in the User Manual in the
chapter “Locking the Machine”.
There is additional, higher risk of accident when working with the SITEST program.
The SITEST program is only to be started by personnel who are authorized to do so.
1 - 8
SIPLACE CAN Bus Edition 10/2018
8
1.1 History of the document
Version Edition Modification
00194932-01 11/2005 Introduction CAN Test Box
00194932-02 01/2006 Error correction and improve layout
00194932-03 01/2006 New Note for Service connector Chapter 1.4
00194932-04 03/2006 New chapter 1.1 Safety
00194932-05 03/2006 Chapter 1.2 insert part number CAN Bus Test cable
Chapter 1.10.7 Legend DIP Switch/Note
00194932-06 03/2006 Insert new chapter 1.10.7"Exchange the Axis unit version 03 to
version 04 on HF/HF3 machine"
00194932-07 07/2006 Insert new chapter 1.10.9 CAN Bus structure Siplace D4
00194932-08 10/2006 Insert chapter 1.10.9 CAN Bus Structure D1,D2
00194932-09 01/2007 Improved picture CAN Bus signal assignment in chapter 1.3
Improved overview CAN Bus structure HS50/60 in chapter 1.10.2
Note: Siplace D3 machine
Chapter 1.10.9 improved overview CAN Bus Terminator D-ma-
chine
00194932-10 02/2008 New Structure, one chapter 1.10.4 for HF/HF3 and one chapter
1.10.5 for X-Series with new CAN Bus structure for X2, X3, X4
Insert new machine Siplace X4i
00194932-11 04/2008 Error correction in chapter 1.10.10 wrong DIP switch description
for D-series
00194932-12 07/2009 Update CAN Bus structure X4i with A364
New chapter 1.10.11 CAN Bus structure Siplace SX Series
00194932-13 01/2011 New ASM Layout
Update chapter 1.10.11 with Siplace DX-Series and SX4/DX4
00194932-14 05/2011 Complete new structure of the document
New chapter with the description of the Error Frame diagnostic
unit.
00194932-15 06/2013 New chapter 4.12 CAN Bus structure Siplace X-Series S
with X4 S, X4i S and X3 S
Tab. 1.1 - 1 Document history