DEUKYX-193-4110_G5S2_VOL4.pdf - 第169页
DEUKYX 2-29 193-41 10 3.2 Maschinen-Informationsliste Fehler-Code (HEX) Anzeigebereich A Anzeigebereich B 809c01 Motor system error (System Error : 0xE400) Communication not establish with Servo Amp (XY Beam). 809c02 Mot…
DEUKYX
2-28193-4110
3.2 Maschinen-Informationsliste
Fehler-Code
(HEX)
Anzeigebereich A Anzeigebereich B
803202
SL feeder loading
operation
Component verication was carried out, but the tape was not detected.
803203
SL feeder loading
operation
Loading of the SL feeder.
803204
SL feeder loading
operation
Since the tape end was detected, placement from SL feeder is moved
forward.
803205
SL feeder loading
operation
Placement cycles of both heads are postponed together for SL feeder
loading.
804001 P.C.B. insert alarm P.C.B. inserted in the Input conveyor. Please remove the inserted P.C.B..
804002 P.C.B. insert alarm P.C.B. inserted in the Output conveyor. Please remove the inserted P.C.B..
805001
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (left). Adjust
the position of the slit cam for out-of-step detection. Check whether the
sensor for slit detection is disconnected.
805002
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (right). Adjust
the position of the slit cam for out-of-step detection. Check whether the
sensor for slit detection is disconnected.
805003
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (A-lane/left).
Adjust the position of the slit cam for out-of-step detection. Check whether
the sensor for slit detection is disconnected.
805004
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (A-lane/right).
Adjust the position of the slit cam for out-of-step detection. Check whether
the sensor for slit detection is disconnected.
805005
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (B-lane/left).
Adjust the position of the slit cam for out-of-step detection. Check whether
the sensor for slit detection is disconnected.
805006
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (B-lane/left).
Adjust the position of the slit cam for out-of-step detection. Check whether
the sensor for slit detection is disconnected.
806001
Bad Mark transfer
information
mismatching
Bad Mark transfer information and PP data have mismatching. Bad Mark
inspection is carried out.
809201
Library tape width
check
The tape width in library and the feeder are not in agreement. Please check
the library and feeder.
809301
Library Feed Pitch
check
Library Feed Pitch differs from Feeder. Please check Library and Feeder.
809401
Library component
size check
Library Component size differs from Feeder. Please check Library and
Feeder.
809402
Library component
size check
Library Component size X is too large to a feeder. Please check Library and
Feeder.
809403
Library component
size check
Library Component size X is too small to a feeder. Please check Library and
Feeder.
809404
Library component
size check
Library Component size Y is too large to a feeder. Please check Library and
Feeder.
809405
Library component
size check
Library Component size Y is too small to a feeder. Please check Library and
Feeder.
809501
Library Feeder Type
check
Library Component Conguration differs from Feeder. Please use Tape
thickness extended Feeder.
809502
Library Feeder Type
check
Library Component Conguration differs from Feeder. Please set [Tape
thickness extended Feeder] in [Use].
809503
Library Feeder Type
check
Library Component Conguration differs from Feeder. Please check Library
and Feeder.
DEUKYX
2-29193-4110
3.2 Maschinen-Informationsliste
Fehler-Code
(HEX)
Anzeigebereich A Anzeigebereich B
809c01 Motor system error
(System Error : 0xE400) Communication not establish with Servo Amp (XY
Beam).
809c02 Motor system error (System Error : 0xE405) Servo Amp parameter error.
809c03 Motor system error
(System Error : 0xE400) Communication not establish with Servo Amp (Head).
809c04 Motor system error The system error occurred in SSCNET.
809d01
Recycle conveyor
lled up
Recycle conveyor became Full. (Block1)
809d02
Recycle conveyor
lled up
Recycle conveyor became Full. (Block2)
809e01 Automatic Teaching
Please skip it because Automatic modication Teaching is impossible in
Nozzle position of Head1.
809e02 Automatic Teaching
Please skip it because Automatic modication Teaching is impossible in
Nozzle position of Head2.
809f01
Conrm Tray Safety
Cover
There is no magazine. Magazine 1 (Lower).
809f02
Conrm Tray Safety
Cover
Rack shutter of operator side is open. Magazine 1 (Lower)
809f03
Conrm Tray Safety
Cover
Rack shutter of traverse side is open. Magazine 1 (Lower)
809f04
Conrm Tray Safety
Cover
The Magazine is not set correctly. Magazine 1 (Lower)
Check lock lever of magazine.
809f05
Conrm Tray Safety
Cover
There is no magazine. Magazine 2 (Upper).
809f06
Conrm Tray Safety
Cover
Rack shutter of operator side is open. Magazine 2 (Upper)
809f07
Conrm Tray Safety
Cover
Rack shutter of traverse side is open. Magazine 2 (Upper)
809f08
Conrm Tray Safety
Cover
The Magazine is not set correctly. Magazine 2 (Upper)
Check lock lever of magazine.
809f09
Conrm Tray Safety
Cover
Motor Error of Magazine (Lower) is detected.
809f0a
Conrm Tray Safety
Cover
Motor Error of Magazine (Upper) is detected.
80a001 Recognition Error Failed in the recognition of the part. Please retry pickup of the part.
80a002 Recognition Error Nozzle position teaching failure. Check nozzle condition.
80a003 Recognition Error
It failed in the light emitter recognition of the side view camera. Please
conrm the light emitter of the side view camera.
80a101
Reading the Side
view camera sensor
Version
The operation for turning on is invalid. Please do operation again after
turning on completely.
80b001
Automatic Teaching
Error
Failed in the recognition. Carr it out again on the next time. Please carry out
cleaning of a nozzle, cleaning of a reference mark, and re-instruction based
on head rotations.
80b002
Automatic Teaching
Error
The jam for a nozzle was detected (Recognition). Please carry out cleaning
of a nozzle
80c001 Tray turning on
Failed in turning on Driver power of Tray (Block1) Magazine1 (Lower).
Please conrm the wiring of Machine
80c002 Tray turning on
Failed in turning on Driver power of Tray (Block1) Magazine1 (Upper).
Please conrm the wiring of Machine
80c003 Tray turning on
Failed in turning on Driver power of Tray (Block2) Magazine2 (Lower).
Please conrm the wiring of Machine
DEUKYX
2-30193-4110
3.2 Maschinen-Informationsliste
Fehler-Code
(HEX)
Anzeigebereich A Anzeigebereich B
80c004 Tray turning on
Failed in turning on Driver power of Tray (Block2) Magazine2 (Upper).
Please conrm the wiring of Machine
80c101
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block1) Magazine1 (Lower)
80c102
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block1) Magazine2 (Upper)
80c103
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block2) Magazine1 (Lower)
80c104
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block2) Magazine2 (Upper)
80c201
Tray ACV miss-
placement error
(Magazine)
Tray (Block1) Magazine1 (Lower) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c202
Tray ACV miss-
placement error
(Magazine)
Tray (Block1) Magazine2 (Upper) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c203
Tray ACV miss-
placement error
(Magazine)
Tray (Block2) Magazine1 (Lower) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c204
Tray ACV miss-
placement error
(Magazine)
Tray (Block2) Magazine2 (Upper) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c301
Tray Safety Cover
Lock cleared (Auto
Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray (Block1)
Magazine1 (Lower).
80c302
Tray Safety Cover
Lock cleared (Auto
Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray (Block1)
Magazine2 (Upper).
80c303
Tray Safety Cover
Lock cleared (Auto
Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray (Block2)
Magazine1 (Lower).
80c304
Tray Safety Cover
Lock cleared (Auto
Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray (Block2)
Magazine2 (Upper).
80c401 Nozzle Exchange
There is no nozzle required for production. Please check the following.
1. Existence of Nozzle Stocker, Clamp Condition
2. Nozzle Conguration Data
80c402 Nozzle Exchange
A nozzle cannot be stored. Please check the following.
1. Existence of Nozzle Stocker, Clamp Condition
2. Nozzle Conguration Data
80c403 Nozzle Exchange ODD Noz of Head is stored for storing high-speed Noz.
80c404 Nozzle Exchange Noz is stored due to error in teaching Noz Position.
80c405 Nozzle Exchange Please take down the nozzle stocker.
80c406 Nozzle Exchange
A necessary nozzle is installed in the head that has not been selected.
Please select the back and forth block, and execute the nozzle exchange.
80c501
Overall Setup
(Exchange support pin)
Pattern Program data set the support pin as [No exchange], so that skipped it.
80c502
Overall Setup
(Exchange support pin)
Noz is not for Support Pin Exchange, so that it is stored.
80c503
Overall Setup
(Exchange support pin)
There is no available nozzle for backup pin exchange. In the case of a multi
function head, please set a nozzle to No.1 - No.7 of the stocker.
80c504
Overall Setup
(Exchange support
pin)
Conveyor Width is stopped at the position for exchanging support pins
because the Support pins of Lane A are stored. Please take out Support
pins from machine, or install Conveyor Width after setting them at production
position.