DEUKYX-193-4110_G5S2_VOL4.pdf - 第312页

DEUKYX 3-134 193-41 10 3.12 Fehler im Automatikbetrieb Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 51 1220 T ransfer Section's Preparation Error Upward movement on PCB Stopper(REV) is abnormal. …

100%1 / 386
DEUKYX
3-133193-4110
3.12 Fehler im Automatikbetrieb
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
511207 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AL) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511208 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AL) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511209 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AL) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511210 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AR) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511211 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AR) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511212 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AR) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511213 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BL) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511214 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BL) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511215 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BL) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511216 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BR) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511217 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BR) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511218 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BR) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511219 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(REV) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
DEUKYX
3-134193-4110
3.12 Fehler im Automatikbetrieb
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
511220 Transfer Section's Preparation Error
Upward movement on PCB Stopper(REV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511221 Transfer Section's Preparation Error
Downward movement on PCB Stopper(REV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511222 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(AREV) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511223 Transfer Section's Preparation Error
Upward movement on PCB Stopper(AREV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511224 Transfer Section's Preparation Error
Downward movement on PCB Stopper(AREV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511225 Transfer Section's Preparation Error
Upward Limit and Downward Limit on PCB Stopper(BREV) are detected
simultaneously.
Prüfen Sie die Verkabelung und justieren Sie die Grenzwerte.
511226 Transfer Section's Preparation Error
Upward movement on PCB Stopper(BREV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511227 Transfer Section's Preparation Error
Downward movement on PCB Stopper(BREV) is abnormal.
Möglicherweise ist der LP-Anschlag defekt oder die Luftzufuhr ist unterbrochen.
511301 Added squeeze error
Added squeeze is not completed.
Öffnen Sie die Sicherheitsabdeckungen und prüfen Sie die bestückten Bauteile.
Entfernen Sie sie gegebenenfalls.
511401 Automatic correction of missed standard mark
Error in automatic correction of missed standard mark.
Führen Sie das Teachen der LP-Markenposition erneut durch.
511402 Automatic correction of missed standard mark
Timeout of automatic correction of missed standard mark.
Führen Sie das Teachen der LP-Markenposition erneut durch.
511403 Automatic correction of missed standard mark
Error in recognizing standard mark.
1. Reinigen Sie den Markenbereich.
2. Prüfen Sie die Beleuchtung.
3. Führen Sie das Teachen der LP-Markenposition erneut durch.
DEUKYX
3-135193-4110
3.13 Autom. Teaching
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
600101 P.C.B. recog camera & beam offset teach.
-----
-----
600102 P.C.B. recog camera & beam offset teach.
Error of Recognition Command response.
-----
600103 P.C.B. recog camera & beam offset teach.
Error of coordinates calculation.
-----
600104 P.C.B. recog camera & beam offset teach.
Error of Data set for XY Beam.
-----
600105 P.C.B. recog camera & beam offset teach.
Error of moving for XY Beam.
-----
600106 P.C.B. recog camera & beam offset teach.
Time-out in XY Beam
-----
600107 P.C.B. recog camera & beam offset teach.
Time-out of communication with recognition.
-----
600108 P.C.B. recog camera & beam offset teach.
Recognition failure of checker mark on parts recognition camera.
-----
600109 P.C.B. recog camera & beam offset teach.
Recognition failure of checker on reference pin.
-----
60010a P.C.B. recog camera & beam offset teach.
Recognition failure of checker mark on glass jig.
-----
600201 Comp. Recog. Camera offset teach.
Could not recognize the glass Jig.
Prüfen Sie, ob sich der Glasrahmen an der richtigen Position bendet (Es besteht
die Möglichkeit, dass sich der Aufnehmer nicht im Kopf bendet oder kein Vakuum
anliegt.)
600202 Comp. Recog. Camera offset teach.
The result of Teaching is out of permission values.
Prüfen Sie, ob die Aufnahme korrekt erfolgte. Ist dies nicht der Fall, teachen Sie
den Offset neu.
600203 Comp. Recog. Camera offset teach.
Error of Recognition command response.
-----
600204 Comp. Recog. Camera offset teach.
Error of coordinates calculation.
-----