DEUKYX-193-4110_G5S2_VOL4.pdf - 第267页
DEUKYX 3-89 193-41 10 3.8 Automatische Einstellung Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 490787 Nozzle set up Error in the result of Side View Camera detect ----- 490788 Nozzle set up T ime-out…
DEUKYX
3-88193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
490779 Nozzle set up
Error in capturing a image of PCB recog camera.
-----
49077A Nozzle set up
Capturing a image of PCB recog camera has not nished within predetermined
time
-----
49077B Nozzle set up
Error in capturing a image of PCB recog camera.
-----
49077C Nozzle set up
Error in recognizing Noz Stocker Mark
-----
49077D Nozzle set up
Recognizing Noz Stocker Mark has not nished within predetermined time.
-----
49077E Nozzle set up
Error in recognizing Noz Stocker Mark
-----
49077F Nozzle set up
Error in recognization of the existence of Noz
-----
490780 Nozzle set up
Recognization of the existence of Noz has not nished within predetermined time
-----
490781 Nozzle set up
Error in recognizing the existence of Noz
-----
490782 Nozzle set up
Error in recognizing Noz ID
-----
490783 Nozzle set up
Recognizing Noz ID has not nished within predetermined time
-----
490784 Nozzle set up
Error in recognizing of Noz ID
-----
490785 Nozzle set up
Time-out of starting Side View Camera detect
-----
490786 Nozzle set up
Time-out of reading out the result of Side View Camera detect
-----
DEUKYX
3-89193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
490787 Nozzle set up
Error in the result of Side View Camera detect
-----
490788 Nozzle set up
Time-out of starting Side View Camera detect (Noz diameter Recog)
-----
490789 Nozzle set up
Time-out of reading out the result of Side View Camera detect (Noz diameter
Recog)
-----
49078A Nozzle set up
Error in the result of Side View Camera detect (Noz diameter Recog)
-----
49078B Nozzle set up
Failed in getting Noz type Data.
-----
49078C Nozzle set up
Exchanging Noz has not started within predetermined time
-----
49078D Nozzle set up
Exchanging Noz has not nished within predetermined time
-----
49078E Nozzle set up
Error in setting Drive Wave of HL-axis
-----
49078F Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490790 Nozzle set up
Error in setting Drive Wave of L-axis
-----
490791 Nozzle set up
Error in coordinate calculation of shifting the Origin
-----
490792 Nozzle set up
Error in setting Sequence Data of HL-axis
-----
490793 Nozzle set up
Error in HL-axis operating
-----
490794 Nozzle set up
Error in L-axis operating
-----
DEUKYX
3-90193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
490795 Nozzle set up
Error in the nozzle stocker mark recog. There is a possibility that the stocker type
is wrong.
Prüfen Sie, ob die eingerichtete Aufnehmerstation mit der Aufnehmerstation in der
maschine identisch ist. Falls nicht, beseitigen Sie das Problem.
490796 Nozzle set up
It is impossible to place a nozzle whose end type is set besides [standard]
adjacent to a head.
-----
490797 Nozzle set up
It stopped by nozzle interference check.
Fahren Sie das System in die Nullposition.
490798 Nozzle set up
Error in communication with recognition.
-----
490799 Nozzle set up
Time-out of communication with recognition.
-----
49079a Nozzle set up
Error in capturing a image with component recognizing camera.
-----
49079b Nozzle set up
To capture a image with component recognizing camera is not complete with the
predetermined time.
-----
49079c Nozzle set up
Error in recognition of nozzle position.
-----
49079d Nozzle set up
Time-out of recognition of nozzle position.
-----
49079e Nozzle set up
Failed in nozzle position teaching. Please conrm Nozzle ID, and then replace a
nozzle.
-----
49079f Nozzle set up
To set nozzle position data failed.
-----
4907A0 Nozzle set up
The nozzle stocker which is not for replace exists on input position.
Fahren Sie das System in die Nullposition.
490801 Program -change linked operation
Program-change linked operation has not nished within appointed time.
-----