DEUKYX-193-4110_G5S2_VOL4.pdf - 第350页

DEUKYX 3-172 193-41 10 3.17 ACV Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 740708 ACV server timeout There was no communication response from the CPU1. ----- 740801 ACV check The S/N of the machine …

100%1 / 386
DEUKYX
3-171193-4110
3.17 ACV
3.17 ACV
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
740305 ACV: Feeder Location Error
Feeder location error is found on tray (Block1).
Prüfen Sie die Bauteilposition und führen Sie eine neue Registrierung durch.
740306 ACV: Feeder Location Error
Feeder location error is found on tray (Block2).
Prüfen Sie die Bauteilposition und führen Sie eine neue Registrierung durch.
740501 ACV Time-out
Device(Block1) Time-out in receiving the result of ACV Check Error. Component
ID on the feeder is not same as one specied by current program.
-----
740502 ACV Time-out
Device(Block2) Time-out in receiving the result of ACV Check Error. Component
ID on the feeder is not same as one specied by current program.
-----
740605 ACV feeder check
Tray(Block1) parts empty.
Supply parts and register one.
-----
740606 ACV feeder check
Tray(Block2) parts empty.
Supply parts and register one.
-----
740701 ACV server timeout
ACV server process didn't respond in proper time.
-----
740702 ACV server timeout
-----
-----
740703 ACV server timeout
Error in an internal data ACV communication program. Please turn off a breaker.
-----
740704 ACV server timeout
Errors in the format of retrieval result of the ACV database.
-----
740705 ACV server timeout
Failed in the access to the ACV database.
-----
740706 ACV server timeout
The waiting time of the ACV database backup processing was exceeded.
-----
740707 ACV server timeout
There was no communication response from the ACV database.
-----
DEUKYX
3-172193-4110
3.17 ACV
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
740708 ACV server timeout
There was no communication response from the CPU1.
-----
740801 ACV check
The S/N of the machine didn't log in ACV server
-----
740802 ACV check
The S/N of the operator didn't log in ACV server
-----
740a01 ACV check
Starting of ACV tray tag reading went wrong.
-----
740f01 ACV check
Splicing registration failed.
-----
740f02 ACV check
Splicing registration failed for the unused feeder.
-----
740f03 ACV check
Abnormality was found in the connection with the ACV server. Please conrm the
ACV server. Please execute the server connection again on "MAINTENANCE"-
"UNIT ADJ"-"ACV ADJ"-screen after it conrms it.
-----
DEUKYX
3-173193-4110
3.18 Systemfehler
3.18 Systemfehler
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
FE0101 Auto Control Error
In auto control the operation can't be continued Error.
Starten Sie neu. Wiederholt sich der Fehler, gehen Sie folgendermaßen vor. /
Optimierung nach einmaliger Änderung der Verwendung einer Blocksortierung,
Erfassungsmodus der Bauteilbibliothek, PEC-Erkennung, Sequenz, LP-
Endposition oder Aufnehmerkonguration eines Bestückungsprogramms. /
Ändern der Fertigungsgeschwindigkeit.
FE0102 Auto Control Error
Stopped by the interference check.
Starten Sie neu.
FE0201 XY Control Error
Error in XY Control Sequence.
Starten Sie neu. Wiederholt sich der Fehler, gehen Sie folgendermaßen vor. /
Optimierung nach einmaliger Änderung der Verwendung einer Blocksortierung,
Erfassungsmodus der Bauteilbibliothek, PEC-Erkennung, Sequenz, LP-
Endposition oder Aufnehmerkonguration eines Bestückungsprogramms. /
Ändern der Fertigungsgeschwindigkeit.
FE0202 XY Control Error
Error in interface check of XY Control Sequence.
Starten Sie neu. Wiederholt sich der Fehler, gehen Sie folgendermaßen vor. /
Optimierung nach einmaliger Änderung der Verwendung einer Blocksortierung,
Erfassungsmodus der Bauteilbibliothek, PEC-Erkennung, Sequenz, LP-
Endposition oder Aufnehmerkonguration eines Bestückungsprogramms. /
Ändern der Fertigungsgeschwindigkeit.
FE0203 XY Control Error
Timeout in XY Control
Starten Sie neu. Wiederholt sich der Fehler, gehen Sie folgendermaßen vor. /
Optimierung nach einmaliger Änderung der Verwendung einer Blocksortierung,
Erfassungsmodus der Bauteilbibliothek, PEC-Erkennung, Sequenz, LP-
Endposition oder Aufnehmerkonguration eines Bestückungsprogramms. /
Ändern der Fertigungsgeschwindigkeit.
FE0301 Control System Error
Error in control system. Control system restarts.
Wenn Bauteile weiter aufgenommen werden, ist es möglich, dass sie auf die LP
oder in die Maschine fallen. Bitte prüfen.
FE0302 Control System Error
Control system failed to restart. Please shut down it.
Starten Sie neu. Wiederholt sich der Fehler, gehen Sie folgendermaßen vor. /
Optimierung nach einmaliger Änderung der Verwendung einer Blocksortierung,
Erfassungsmodus der Bauteilbibliothek, PEC-Erkennung, Sequenz, LP-
Endposition oder Aufnehmerkonguration eines Bestückungsprogramms. /
Ändern der Fertigungsgeschwindigkeit.