DEUKYX-193-4110_G5S2_VOL4.pdf - 第264页
DEUKYX 3-86 193-41 10 3.8 Automatische Einstellung Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 49075C Nozzle set up XY Beam start-up has not be completed within predetermined time ----- 49075D Nozzle…
DEUKYX
3-85193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
49074D Nozzle set up
Error in coordinate calculation of Noz Stocker Mark position.
-----
49074E Nozzle set up
Error in coordinate calculation of detect starting position for Side View Camera.
-----
49074F Nozzle set up
Error in coordinate calculation of detect nishing position for Side View Camera
-----
490750 Nozzle set up
Error in coordinate calculation of recog position of Noz ID
-----
490751 Nozzle set up
Error in coordinate calcualtion of recog position of Noz in Stocker
-----
490752 Nozzle set up
Error in coordinate calculation of exchange position of Noz (Placing Noz)
-----
490753 Nozzle set up
Error in calculating Placing height for Noz (Placing Noz)
-----
490754 Nozzle set up
Error in calculating Placing height for Noz (Placing Noz)
-----
490755 Nozzle set up
Error in coordinate calculation of exchange position of Noz (Storing Noz)
-----
490756 Nozzle set up
Error in calculating Storing Height for Noz (Storing Noz)
-----
490757 Nozzle set up
Error in calculating Storing Height for Noz (Storing Noz)
-----
490758 Nozzle set up
Error in setting Sequence Data of XY-axis
-----
490759 Nozzle set up
Error in setting Drive Wave of DD-axis
-----
49075A Nozzle set up
Error in setting Drive Wave of NS-axis
-----
49075B Nozzle set up
Error in setting Drive Wave of Z-axis
-----
DEUKYX
3-86193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
49075C Nozzle set up
XY Beam start-up has not be completed within predetermined time
-----
49075D Nozzle set up
Failed in XY-axis start-up
-----
49075E Nozzle set up
Failed in DD-axis start-up
-----
49075F Nozzle set up
Failed in NS-axis start-up
-----
490760 Nozzle set up
Failed in Z-axis start-up
-----
490761 Nozzle set up
XY-axis Operating has not been completed within predetermined time
-----
490762 Nozzle set up
Error in XY-axis operating
-----
490763 Nozzle set up
XY Beam Operating has not been completed within predetermined time
-----
490764 Nozzle set up
Error in setting Drive Wave of HL-axis
-----
490765 Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490766 Nozzle set up
Error in setting Drive Wave of NL-axis
-----
490767 Nozzle set up
Error in setting Drive Wave of L-axis
-----
490768 Nozzle set up
Up/Down axis start-up has not been completed within predetermined time
-----
490769 Nozzle set up
Failed in HL-axis start-up
-----
49076A Nozzle set up
Failed in NL-axis start-up
-----
DEUKYX
3-87193-4110
3.8 Automatische Einstellung
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
49076B Nozzle set up
Failed in L-axis start-up
-----
49076C Nozzle set up
Up/Down axis start-up has not been completed within predetermined time
-----
49076D Nozzle set up
Error in turning on PCB recog camera Light
-----
49076E Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
-----
49076F Nozzle set up
Error in turning on PCB recog camera Light
-----
490770 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490771 Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
(Teaching Noz Stocker)
-----
490772 Nozzle set up
Error in turning on PCB recog camera Light (Teaching Noz Stocker)
-----
490773 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490774 Nozzle set up
Turning on PCB recog camera Light has not nished within predetermined time
(Noz Recog)
-----
490775 Nozzle set up
Error in turning on PCB recog camera Light (Noz Recog)
-----
490776 Nozzle set up
Error in turning off PCB recog camera Light
-----
490777 Nozzle set up
Turning off PCB recog camera Light has not nished within predetermined time
-----
490778 Nozzle set up
Error in turning off PCB recog camera Light
-----